4Likes

NEW HOBBYWING STOCK SUPERCHARGED SOFTWARE

Reply Subscribe

Thread Tools

Search this Thread

10-19-2011, 01:23 AM

#6721

mcdoogle

Tech Apprentice

Join Date: May 2011

Posts: 53

Trader Rating: 0

Quote:

Originally Posted by bkspeedo

I am running a 3.8 FDR but my other ESC's work fine with this FDR. This other ESC had the same problem in the beginning and it took them quite some time to fix it.

Hopefully the Hobbywing group can figure it out sooner than later.

I have the same problem with FDR 3.39 (66T spur, 37T Pinion), i can match top end speed with other guys but i have to brake so early to try and get round our hairpin that the other guys have left me :-(

10-19-2011, 02:47 AM

#6722

Barry_Hughes

Tech Regular

Join Date: Oct 2004

Location: Ipswich, England

Posts: 468

Trader Rating: 0

Quote:

Originally Posted by mingnon

I prefer to use drag brake, dont know why, just fits my driving style. Having changed to the hobbywing esc, it isnt and strong as others. Me personaly, would prefer it to be more effective and adjustable

Drag barake force is adjustable second step of programming

10-19-2011, 04:40 AM

#6723

old_dude

Tech Master

iTrader: (1)

Join Date: Aug 2008

Location: Medina, Ohio

Posts: 1,839

Trader Rating: 1 (100%+)

Isn't drag brake a percentage of the full brake force? I thought I read that somewhere and I will do a test to confirm it.
I just loaded the new v3 stock software into my ESC and set the drag brake to my previous value. It was much more effective and I reduced my setting from 30% to 15%. I am running the 4 capacitors though.

10-19-2011, 10:43 AM

#6724

mutley001

Tech Addict

iTrader: (1)

Join Date: Oct 2004

Location: Kent, UK

Posts: 676

Trader Rating: 1 (100%+)

211 vs 930 stock

Hi guys
Just a quick question. I have been running 211stock software and have just changed to 930 stock. What differences will I feel when running the same settings? Anything?
Cheers

10-19-2011, 11:21 AM

#6725

mwoods

Tech Regular

Join Date: Dec 2005

Location: england

Posts: 304

Trader Rating: 0

Quote:

Originally Posted by Barry_Hughes

Drag barake force is adjustable second step of programming

have u got the 930 on ur laptop yet ? if u have cud i update mine on sunday

10-19-2011, 12:25 PM

#6726

Bappe

Tech Regular

Join Date: May 2002

Location: Sweden

Posts: 410

Trader Rating: 0

need a setup for xtremestock with speed passion 17.5 boosted ASAP!

indoor carpet, small to medium size track

10-19-2011, 01:46 PM

#6727

lethallee69

Tech Master

iTrader: (17)

Join Date: Jul 2008

Location: Hobart TAS Australia

Posts: 1,071

Trader Rating: 17 (100%+)

I have a problem with my extreme stock ESC , it won't run unless it is given a push first, then it will run until it comes to a complete stop
I have changed motors and sensor leads and the problem is still there, have even re flashed speedy
Any suggestions

10-19-2011, 05:30 PM

#6728

COBRARACING

Tech Elite

Thread Starter

Join Date: Nov 2007

Posts: 3,338

Trader Rating: 0

Quote:

Originally Posted by lethallee69

try another battery with a higher discharge rating and also drop your punch level .by two so if your running 9 got to 7 .

10-19-2011, 05:46 PM

#6729

bkspeedo

Tech Elite

iTrader: (5)

Join Date: Nov 2007

Location: Loveeeee, CO

Posts: 3,149

Trader Rating: 5 (100%+)

Quote:

Originally Posted by lethallee69

Along with Angelo's comments it may be a bad sensor wire or board in the motor. It either of these are bad it will try running in sensor-less mode. With high wind motors the ESC has a hard time starting the motor due to not enough feedback from the motor coils.

10-20-2011, 12:25 AM

#6730

lethallee69

Tech Master

iTrader: (17)

Join Date: Jul 2008

Location: Hobart TAS Australia

Posts: 1,071

Trader Rating: 17 (100%+)

Quote:

Originally Posted by bkspeedo

Have tried different motors and sensor cables, it still runs with boost mode it's just that it won't take off without a push first

10-20-2011, 12:52 AM

#6731

scoop

Tech Adept

Join Date: Jul 2010

Location: Suffolk, England

Posts: 184

Trader Rating: 0

Quote:

Originally Posted by lethallee69

Have tried different motors and sensor cables, it still runs with boost mode it's just that it won't take off without a push first

If you have reflashed it and reset your end points then I would be looking at the batteries

10-20-2011, 04:29 AM

#6732

toby333

Tech Adept

iTrader: (4)

Join Date: Mar 2007

Posts: 186

Trader Rating: 4 (100%+)

Quote:

Originally Posted by lethallee69

Have tried different motors and sensor cables, it still runs with boost mode it's just that it won't take off without a push first

Next step change the cap's and if that doesn't help most likely the esc is faulty. Goodluck.

10-20-2011, 04:37 AM

#6733

xrayal

Tech Adept

Join Date: Aug 2009

Location: hertforshire

Posts: 148

Trader Rating: 0

Quote:

Originally Posted by lethallee69

Have tried different motors and sensor cables, it still runs with boost mode it's just that it won't take off without a push first

had exact same problem. widen your deadband and if you have reverse enabled, disable it. try it

10-20-2011, 08:33 AM

#6734

roger999

Tech Fanatic

iTrader: (13)

Join Date: Aug 2010

Posts: 844

Trader Rating: 13 (100%+)

Quote:

Originally Posted by lethallee69

Try to play with th-trim. Give there +1 or +2.

10-20-2011, 11:35 AM

#6735

Madulla

Tech Master

Join Date: Aug 2010

Location: Calgary

Posts: 1,095

Trader Rating: 0

Tried the V3 no timing on the Just Stock last night. Couldn't tell if the brakes were stronger. My lap times are the same but the temp went down 20F. Really happy with the update. Good job.