Veteran TAMIYA TA03 fans!
#901
Tech Legend
iTrader: (51)
Join Date: Sep 2001
Location: Castle Mamba Max Pro. Feel its power!!!!!!!!!!
Posts: 21,220
Trader Rating: 51 (100%+)
They are fun cars to run. A little dated but against other Tamiya type cars they do well. I have a TA03R-S TRF version. I run it mainly at TCS races. I always have alot of fun running it. Lots of good stuff on Ebay for those cars to.
#902
Wow the TA03 chassis, I used to have the RS TRF...
in my earlier days!
In those days the TRF (404,414) cars burned A hole in your pocket and they weren't even TCS legal!
I Honestly miss it!
It's great to hear people still race with it,
I always loved the car, too bad I don't have it anymore
Back in the days I still drove it I was thinking making A twin motored TA03, Combining the R with the F (or vise versa).
Though I never tried it, but I think it should be possible.
Do you guys think that could be done, and does someone ever tried it?!
in my earlier days!
In those days the TRF (404,414) cars burned A hole in your pocket and they weren't even TCS legal!
I Honestly miss it!
It's great to hear people still race with it,
I always loved the car, too bad I don't have it anymore
Back in the days I still drove it I was thinking making A twin motored TA03, Combining the R with the F (or vise versa).
Though I never tried it, but I think it should be possible.
Do you guys think that could be done, and does someone ever tried it?!
Last edited by Tekin; 02-13-2005 at 10:58 AM.
#903
Originally posted by Tekin
Do you guys think that could be done, and does someone ever tried it?!
Do you guys think that could be done, and does someone ever tried it?!
It has been done. tRY reading through this thread. A picture has already been posted before(around 2002)
#904
Tech Legend
iTrader: (51)
Join Date: Sep 2001
Location: Castle Mamba Max Pro. Feel its power!!!!!!!!!!
Posts: 21,220
Trader Rating: 51 (100%+)
I think a magazine did an article on that one time.
#905
help
hello to all guys here.. im also a big fan of ta03..
guys i need your help.. im running on a stock class of johnson 540..
i need some help about gearings.. my car is ta03r-pro..
can someone help me with this gearings..
my gear is 64pitch, and i cant find the right pinion to get great acceleration & full speed for johnson 540..
hope u could help me.. thanks very much.. hope someone will reply soon..
guys i need your help.. im running on a stock class of johnson 540..
i need some help about gearings.. my car is ta03r-pro..
can someone help me with this gearings..
my gear is 64pitch, and i cant find the right pinion to get great acceleration & full speed for johnson 540..
hope u could help me.. thanks very much.. hope someone will reply soon..
#906
Tech Legend
iTrader: (51)
Join Date: Sep 2001
Location: Castle Mamba Max Pro. Feel its power!!!!!!!!!!
Posts: 21,220
Trader Rating: 51 (100%+)
Originally Posted by nikkiesteban
hello to all guys here.. im also a big fan of ta03..
guys i need your help.. im running on a stock class of johnson 540..
i need some help about gearings.. my car is ta03r-pro..
can someone help me with this gearings..
my gear is 64pitch, and i cant find the right pinion to get great acceleration & full speed for johnson 540..
hope u could help me.. thanks very much.. hope someone will reply soon..
guys i need your help.. im running on a stock class of johnson 540..
i need some help about gearings.. my car is ta03r-pro..
can someone help me with this gearings..
my gear is 64pitch, and i cant find the right pinion to get great acceleration & full speed for johnson 540..
hope u could help me.. thanks very much.. hope someone will reply soon..
#907
Originally Posted by wyd
Man when I ran the stock silver motors I ran a huge pinion gear to make it fast. I ran 33 with the stock 63 tooth spur. It is alot of gear but it made the 540 scream. It will get hot but when I ran GT-3 with mine and geared it hard.
is that the top speed and acceleration for ta03?
#908
Tech Legend
iTrader: (51)
Join Date: Sep 2001
Location: Castle Mamba Max Pro. Feel its power!!!!!!!!!!
Posts: 21,220
Trader Rating: 51 (100%+)
Originally Posted by nikkiesteban
is that the top speed and acceleration for ta03?
#909
Originally Posted by wyd
Running with the silver can you need good corner speed to run that type of gearing. If you don't have any corner speed that type of gearing won't be fast. IN the straight it will rip and bog some in the corners but thats where good corner speed comes in to play. IT is hard to make these cars fast with a silver can because of all the gears on the 03 but you can get going pretty quick.
but can u details it.. for example.. xxx pinion teeth, xxx spur teeth and xxx ptich.. tnx again
#910
Tech Legend
iTrader: (51)
Join Date: Sep 2001
Location: Castle Mamba Max Pro. Feel its power!!!!!!!!!!
Posts: 21,220
Trader Rating: 51 (100%+)
I ran a 33 tooth pinion with the stock standard 63 tooth spur all in 64 pitch. I think that made my rollout around 33mm or so with the silver can.
#911
Originally Posted by wyd
I ran a 33 tooth pinion with the stock standard 63 tooth spur all in 64 pitch. I think that made my rollout around 33mm or so with the silver can.
#912
Tech Legend
iTrader: (51)
Join Date: Sep 2001
Location: Castle Mamba Max Pro. Feel its power!!!!!!!!!!
Posts: 21,220
Trader Rating: 51 (100%+)
Originally Posted by nikkiesteban
ohhh.. hows the speed..? was it fast? tnx again...
#913
gearing.
hello to all guys again.. im here again..
i have a problem with my tao3r-pro.. it not that fast.. what gearings that u should suggest me... tnx.. im using 540 johnson.. i want full topspeed and acceleration..
i have a problem with my tao3r-pro.. it not that fast.. what gearings that u should suggest me... tnx.. im using 540 johnson.. i want full topspeed and acceleration..
#914
Tech Legend
iTrader: (51)
Join Date: Sep 2001
Location: Castle Mamba Max Pro. Feel its power!!!!!!!!!!
Posts: 21,220
Trader Rating: 51 (100%+)
Originally Posted by nikkiesteban
hello to all guys again.. im here again..
i have a problem with my tao3r-pro.. it not that fast.. what gearings that u should suggest me... tnx.. im using 540 johnson.. i want full topspeed and acceleration..
i have a problem with my tao3r-pro.. it not that fast.. what gearings that u should suggest me... tnx.. im using 540 johnson.. i want full topspeed and acceleration..
You need to make the transmissions as free as possible and keep the belt tension as loose as ou can with out it coming off.
#915
Tech Fanatic
iTrader: (1)
From Tamiya.com website:
Tamiya is re-releasing TA03F-PRo as a drift kit. It features the same components as the original plus new spring kit, new wheel design and new tires design. The picture showed TT-302BK ESC on it but most likely it will available as an optional equipment only.
Here is a rough translation from Tamiya.com:
Item No: 49377
TA03F PRO drift specifications chassis kit
Total length = 388mm
RC limited series - TA03F PRO DRIFT SPEC CHASSIS KIT
* Front motor & belt whose stability is high drive 4WD, TA03F ・ PRO was finished in drift specification. * Equipping the private tire of special cross section. * Completeness equipment charm e.g., light weight high rigidity the FRP make double deck frame, full bearing specification, the ball diff. is equipped on front and back. * The responsiveness for load movement is high, can enjoy drift travelling with ease.
Tamiya is re-releasing TA03F-PRo as a drift kit. It features the same components as the original plus new spring kit, new wheel design and new tires design. The picture showed TT-302BK ESC on it but most likely it will available as an optional equipment only.
Here is a rough translation from Tamiya.com:
Item No: 49377
TA03F PRO drift specifications chassis kit
Total length = 388mm
RC limited series - TA03F PRO DRIFT SPEC CHASSIS KIT
* Front motor & belt whose stability is high drive 4WD, TA03F ・ PRO was finished in drift specification. * Equipping the private tire of special cross section. * Completeness equipment charm e.g., light weight high rigidity the FRP make double deck frame, full bearing specification, the ball diff. is equipped on front and back. * The responsiveness for load movement is high, can enjoy drift travelling with ease.