240Z

iTrader: (6)

Not only do the plastic ones break, but they are hard to find.

I have the Yeah Racing and it is very solid, but rather heavy. I prefer the 3Racing 4 piece kit and have never had a problem with it. The BL mounting is not an issue with my ballistic as the solder tabs are conveniently located and the sensor wire is also oriented out the side of the motor. You may find that motors with wires that come out the end of the can will be a tight fit.

gashuffer

iTrader: (48)

Just run the 104 aluminum mount. Fits perfect. A few guys at the track I run on use them on their 103's

F N CUDA

iTrader: (34)

The F104 alum. motor mount will lower the chassis more than the F103 mount.

The axle sits higher in the sideframe and you will not be able to run your foams as close to the rim as you could with the 103 mount.

It works fine for rubber tires or new foams tho.

gashuffer

iTrader: (48)

This is true, but those guys don't run all the way down to ribbons on their foams so I guess thats why they are using them.

spring71

iTrader: (3)

New Shimizu F103 tires are in stock.

Also, more compounds for Shimizu F104 tires are in stock.



Click Here to check out.

Thanks.

BullFrog

iTrader: (4)

The only problem is you won't accept a order over the phone! I tried it tonight! that's TQ racing.

F N CUDA

iTrader: (34)

Sean at TQ is a great guy!

Phone orders must be tough for him to do or he just chooses not to do them for any number of reasons.

It's great that he has chosen to stock the hard to get parts for our F1s tho, aint it?
He is definitely on top of the onroad carpet parts supply too.

If you see what you need and don't do paypal or credit card, maybe a friend can place an order for you.

tunerjetta29

iTrader: (6)

Who orders over the phone when there is online checkout with live inventory?? You have two choices, in the store or online. Sounds reasonable to me ?

spring71

iTrader: (3)

Sorry about the inconvenience.

Usually, when customers ask me to accept order over the phone, I recommend them to use online.

Because, over the phone there is more chance to make a mistake or miscommunication.

If you don't like to order online, please email or PM me the items you need.

Thanks.

BullFrog

iTrader: (4)

I don't order anything to pay with a credit card or paypal over the internet.I've NEVER had anyone refuse an order to be given over the phone ever. I do this often with many question about what it is I'm buying. Making sure it's what I want. I'll shop on line but not buy online. I will send you an e-mail of the parts I was looking for later.

spring71

iTrader: (3)

I understand what your are concerned.

I'll be waiting for your email.

Please send me the shipping address with your email.

Sorry again about the inconvenience.

Thanks.

abailey21

iTrader: (37)

Ok, after reading 75 plus page of this thread I still have a few questions.

I just procured an F103RM, and I would like to know what the hot setup is.

After reading this thread I got some Ride tires and rims on order from TQ.

I've mounted my 104 motor pod on my 103, is that preferred or should I stick to my 103 plastic one?

I have the Fiberglass chassis, should I spring for a carbon one right away or will I be fine with the stock one?

I have the short top deck, should I also be looking for the long one or are the short ones sufficient for carpet rubber?

I don't run TCS so off brand is no issue, which wing sets and bodies are the carpet rubber guys using?

BullFrog

iTrader: (4)

Just to let everyone that reads this know. The problem has been resolved. I'll have an order coming from TQ . Now does anyone know somewhere in the US that carries 3racing stuff. I still need two parts.

joeh5194

iTrader: (7)

http://www.rpphobby.com/SearchResults.asp?Search=f109

HeliYogi

iTrader: (17)

Happy holidays and best wishes for 2011 to all the forum F1 racers and enthusiast.

Thank you for keeping RC F1 Hot with your post, keep it up.

Cheers,
Marcos


Is your future looking black?