Tamiya TB-03
#138
Tech Initiate
swimbikerun - you have to flip them over and run either 3mm or 4mm spacers under them (depending if you use the stock 1mm shims or not) to space them to the correct height. Or get the new bridged mounts made by 3racing
I just received a couple of spur gears made by PRS as suggested on this thread. the quality is fine, but I have 2 problems with them - the first is that they are only 1/2 the width of the stock gears. The second and worst is that only 2 of the holes lineup with the mounting holes on the spur adapter - not all 4 like stock. not real comfortable mounting thespur with only 2 screws.
Does anyone know if the Robinson or some other brand spur actually mounts correctly before I waste my money again?
I just received a couple of spur gears made by PRS as suggested on this thread. the quality is fine, but I have 2 problems with them - the first is that they are only 1/2 the width of the stock gears. The second and worst is that only 2 of the holes lineup with the mounting holes on the spur adapter - not all 4 like stock. not real comfortable mounting thespur with only 2 screws.
Does anyone know if the Robinson or some other brand spur actually mounts correctly before I waste my money again?
#140
Tech Initiate
OK well thanks cookie - if you're using it that way with no problems I guess i'll give it a try!
#142
Tech Fanatic
iTrader: (108)
I just used the PRS 72t 64p spur and it worked great. 2 holes works fine, especially for 17.5.
Thanks for the suspension bridge. I flipped the bridges for the ones away from the front/rear with only 2mm of spacers and ran the bridges clostest to the front/rear flat with 0 spacers. This seems to drop the roll center down.
Thanks for the suspension bridge. I flipped the bridges for the ones away from the front/rear with only 2mm of spacers and ran the bridges clostest to the front/rear flat with 0 spacers. This seems to drop the roll center down.
#143
anyone know wat all i need to do a ifs conversion on a TB03D??? AND is the drift version normal front suspension ok for racing??