JayBee

iTrader: (31)

Hey fellas, what's a good starting rollout w/ 60mm & a C027?

skypilot

iTrader: (14)

whats rollout?

or,

rollout schmo out, gear it till it melts then back off a tooth.

skypilot

iTrader: (14)

btw, decided not to be lazy and put the thick chassis and top deck on, jaco 2xpink and 2xpink orange, 13.5, holy smokes that was fast and fun. problem thou, wore out the foams in one night, is that normal??

porsche928gs

justin lessard

iTrader: (1)

if its brushed 27.5..brushless idk

Static_racing

What is the track like? Is it open/tight or large/small? Are there lots of tight switchbacks or is it a roval? All of these things matter when measuring rollout. I'd start with a 28mm rollout and tune from there.

skypilot

iTrader: (14)

track is SIR (they laid carpet for the winter over the asphalt) our wed, fri, and sunday racing is on liverc.com (usually)

boon

hey guys, bit off topic here..

just got some new cells hot from the factory and not sure what to do with them as there is no racing for a few weeks!

should i build them, charge, discharge, equalise and put a bit of juice back in them for the next few weeks or just leave them be with the charge they have in them from the factory? btw there IB's

Jon Kerr

iTrader: (17)

Do exactly what you said and cross your fingers that you don't loose cells.

STLNLST

iTrader: (32)

i'd build them and then put some charge into them and pray for the best:batma n:

boon

when i said "hot out of the factory" i mean, just out of the factory, not that my cells where actually hot as far as i know there isnt a problem with the cells just wondering what is the best way to store them before the next race

cheers for the help

PW

Build them, discharge them and then charge them fully at 4amps. Repeak (3 or 4amps) once a week you don't run them.


Ran my "big track" setup this weekend and the car was dialed! Made a few changes for the extreme tempature:

-2-hole pistons (drilled 1.2mm)
-40wt oil with Hybrid o-rings (35wt if you have stock o-rings)
-New med/flex rear arms

Static_racing

Been working on a rubber/Carpet setup, We'll see how good it is in Vegas.
I'll have the rest of the Team there to help and depending on how good it is, I'll make sure its posted.

yokemad

That would be Great Mike Many People waiting for a Good Rubber Setup...
Wish you a best Luck in Vegas

Static_racing

Thanks bro