-R2-

iTrader: (4)

We have on order the tires seperate so that you will be able to use your own insert like the Bomb Ones, the tires work but I also agree that the foam is way too soft and breaks down too fast.

Toiffel

iTrader: (52)

If not mistaken that was the first quali, I took TQ, the 2nd quali beat my TQ and then won the main, so it was a pretty good night!!!

Used Up Junk

iTrader: (7)

This looks like a KILLER litte truck. I'd like to pick one up for next season instead of a 4WD SC truck as I already have a 2WD SC and I like to run different classes. I was wondering the same thing about body options and took a look at some of the bodys out there for GAS 1/10th stadium trucks since most of them have the rear shock tower at the back of the chassis much like the TT does and the wheelbase looks really close to a RC10GT2, there is less than a quarter of an inch difference!

tonyv2382

iTrader: (67)

Looking into one of these...What springs are available for it. Just the stock red ones or are there other sets to choose from?

emag521

iTrader: (2)

Crazy question. What is the pitch of the spur it looks like a 32? I am looking to pull the trigger on one however I cannot find the pitch of the spur in any of the manuals. I plan to put a sidewinder SCT in it.

Thanks

S/X Runner

iTrader: (37)

Mod 1. it comes with a 13 3mm bore mod 1 pinion ,which would be perfect for the Castle sc system.

Evo X Revo

iTrader: (17)

Actually waiting on one myself! As far as the springs go, from what I've read so far is that guys are using the blue ofnas meant for the hyper 10 sc. But the fronts need to be cut down though. I am sure there are spring sets from some other kit that'll work. Just haven't been discovered or even exist yet.

Can't wait to get it. Taking forever. They seem to be flying off the shelves.

jrz93

iTrader: (9)

the bomb ones??
i have losi wheels someone gave me that are labeled "bomb" on the wheel
they seem stiffer...what are they n who makes em?

Toiffel

iTrader: (52)

Pretty sure he's talking about the Trinity "Bomb" Foams.....

prettyboy

iTrader: (59)

Hoping someone can shed some light on steering for me.. I did the steering mod asper Ray and I relize that it realy dont give you more steering so my question is how do you get more steering out of this? Ive done some grinding on the pillow ball mounts,lower arms where the pillow ball screws in so it can get more throw but no matter what ive tryed I get a boat load of steering to the right and not so much steering to the left. Any help on getting more steering throw left and right will be great..

Thanks Rob

slowslug

iTrader: (6)

try adding toe out and removing the front sway bar.also try running a lighter weight oil in the front diff.im running 2 degress toe out and 1-7-3 in the diffs and it will turn on a dime.

Toiffel

iTrader: (52)

Couple of things, 1st. If you don't have the same amount of throw left to right, there is a mechanical problem, either servo wasn't centered properly, or your steering linkage is out of wack.

So making any set up changes are not going to affect the servo movement. Make sure your steering assembly is perfect, then work on set up.....

emag521

iTrader: (2)

Thanks. I wasn't sure that the 80% would come with one or not. According to the manual it does so we will see.

Kylar

iTrader: (187)

Damn, does anyone have these in stock? I want one for my xmas present

Kylar

iTrader: (187)

Damn, does anyone have these in stock? I want one for my xmas present