Schumacher Corner
Tech Champion
iTrader: (4)
I am racing rubber carpet this weekend at Minnreg in Largo, FL along with the rest of Team Schu's FL racers. We should have some good setups next Monday.
PDub will probably do some Mod Foam testing there too.
PDub will probably do some Mod Foam testing there too.
Tech Champion
iTrader: (31)
Tech Master
iTrader: (5)
also how u get your chassis and shock towers edges so round and shiny? any tips?
a question for every one with the mi2 ec in board hinge blocks i put my hinge pins and arms on then tightened them to the chassis then when i went to add the wheel base clips the hinge pin bound up.
so how do u install the inner hinge pins so the don't bind up?
if it matters i find the newer stainless pins don't bind as easily why is this?
cheers guys
Tech Champion
iTrader: (31)
I get alot of crap for how long it takes me to build and maintain my car but I have yet to DNS a race due to not being prepared
I use a needle tip diamond grinder from Dremel, superthin CA (applied w/ a Q-tip!), 600 grit sandpaper, Mothers billet alum. polish and lots of elbow grease, in that order. See what I'm talkin' about? LOL... Now don't ask me about my diff
Tech Lord
iTrader: (26)
Parma makes the stuff I use....part#10800
I get alot of crap for how long it takes me to build and maintain my car but I have yet to DNS a race due to not being prepared
I use a needle tip diamond grinder from Dremel, superthin CA (applied w/ a Q-tip!), 600 grit sandpaper, Mothers billet alum. polish and lots of elbow grease, in that order. See what I'm talkin' about? LOL... Now don't ask me about my diff
I get alot of crap for how long it takes me to build and maintain my car but I have yet to DNS a race due to not being prepared
I use a needle tip diamond grinder from Dremel, superthin CA (applied w/ a Q-tip!), 600 grit sandpaper, Mothers billet alum. polish and lots of elbow grease, in that order. See what I'm talkin' about? LOL... Now don't ask me about my diff
Super Moderator
iTrader: (239)
i thought he was going to run mod rubber?? there is atleast 4 of us running mod rubber
Tech Champion
iTrader: (31)
Tech Champion
iTrader: (4)
I was talking to Jason at BMi today about how tore up some people's cars look. These same people always have mechanical failures and dumb stuff go wrong hurting thier results.
I am just an OK driver but my cars aew always dialed and super fast. This gets me better results than my driving alone can muster.
I am just an OK driver but my cars aew always dialed and super fast. This gets me better results than my driving alone can muster.
Tech Elite
iTrader: (49)
Tech Champion
iTrader: (31)
I was talking to Jason at BMi today about how tore up some people's cars look. These same people always have mechanical failures and dumb stuff go wrong hurting thier results.
I am just an OK driver but my cars aew always dialed and super fast. This gets me better results than my driving alone can muster.
I am just an OK driver but my cars aew always dialed and super fast. This gets me better results than my driving alone can muster.
Super Moderator
iTrader: (239)
Me too
Last edited by Tim Kowal; 06-12-2007 at 07:02 PM. Reason: wrong thread
Tech Legend
iTrader: (51)
Join Date: Sep 2001
Location: Castle Mamba Max Pro. Feel its power!!!!!!!!!!
Posts: 21,220
Trader Rating: 51 (100%+)
Tech Champion
iTrader: (4)