Kyosho Ultima RB6 & RB6.6 Car Thread
|
|||
#9604
Moderator
iTrader: (470)
Join Date: Nov 2009
Location: North Carolina by way of SoCal!
Posts: 4,785
Trader Rating: 470 (100%+)
^^^^ At 35/69 Are you running the STRC motor plate in order to have it fit? I know that gives you one more tooth or so over the stock plate. Mine is at 33/69 and temps are 95-100 so I am adding a tooth.
#9606
You can run 35-69 on the stock kyosho plate, but not any more than that...
#9608
Moderator
iTrader: (470)
Join Date: Nov 2009
Location: North Carolina by way of SoCal!
Posts: 4,785
Trader Rating: 470 (100%+)
#9609
R/C Tech Elite Member
iTrader: (207)
Man, the LW Blade body is like paper! Gonna spray bomb it solid white amd hit the track tomorrow, hoping to get some good runs in...my car got a fresh B-fast diff, new Savox 1251 lo-pro servo and Kyosho LW body.....between the body and servo I shaved 32g off my car.
#9611
Anyone running mod with lightweight chassis, or just for stock? Thx
#9614
Mr Tebo put his Reedy Race setup on his blog. Interesting stuff
http://jtprc.com/2014/01/30/rb6-reedy-race-setup/
http://jtprc.com/2014/01/30/rb6-reedy-race-setup/
#9615
Tech Addict
iTrader: (6)
I had a few laps yesterday, out of the box it handles well. Made some adjustments on the rear shocks and it drives much better. Cleared a tabletop twice till i managed to broke the rear hub. Are the hubs on the pro kit and rtr the same? Same material? And just an update the shocks are still holding well.
Last edited by mog ruith; 01-30-2014 at 06:10 PM.