Kyosho Ultima RB6 & RB6.6 Car Thread
|
|||
Tech Elite
iTrader: (29)
Tech Lord
iTrader: (360)
Thanks guys for all the help with the RR/RF inserts.
Tech Elite
iTrader: (67)
Which body have you all found gives the best overall performance? Trying to decide btwn Phantom and Bulldog Gen 3.
The Gen3 bulldog is better then the stock body IMHO. I haven't tried the phantom yet.
Tech Master
iTrader: (83)
Tech Master
iTrader: (83)
Does anybody know if the mip aluminum puck system is compatible with the kyosho gear diff? This one is listed as for a gear diff but I was unsure if it will work with the stock gear diff and the included out drives
http://www.amain.com/mip-pucks-alumi...system/p298986
http://www.amain.com/mip-pucks-alumi...system/p298986
Does anybody know if the mip aluminum puck system is compatible with the kyosho gear diff? This one is listed as for a gear diff but I was unsure if it will work with the stock gear diff and the included out drives
http://www.amain.com/mip-pucks-alumi...system/p298986
http://www.amain.com/mip-pucks-alumi...system/p298986
Tech Master
iTrader: (13)
I’m going to order my Puck system for next season 17.5 stock racing soon but just wanted to know something.
It says that you need the following 3 items:
Kyosho Tensionner Spring- UM124
Kyosho Ball Diff. Screw Set - LA208
Kyosho Diff. Gear Set - UM509
I am wondering is that diff screw is the correct one or should I get the RB6 one (TF120)?
Also is the gear diff UM509 needed as it has a diff supplied in the kit listing?
http://miponline.com/store/mip13165.html
Cheers for any help
It says that you need the following 3 items:
Kyosho Tensionner Spring- UM124
Kyosho Ball Diff. Screw Set - LA208
Kyosho Diff. Gear Set - UM509
I am wondering is that diff screw is the correct one or should I get the RB6 one (TF120)?
Also is the gear diff UM509 needed as it has a diff supplied in the kit listing?
http://miponline.com/store/mip13165.html
Cheers for any help
I’m going to order my Puck system for next season 17.5 stock racing soon but just wanted to know something.
It says that you need the following 3 items:
Kyosho Tensionner Spring- UM124
Kyosho Ball Diff. Screw Set - LA208
Kyosho Diff. Gear Set - UM509
I am wondering is that diff screw is the correct one or should I get the RB6 one (TF120)?
Also is the gear diff UM509 needed as it has a diff supplied in the kit listing?
http://miponline.com/store/mip13165.html
Cheers for any help
It says that you need the following 3 items:
Kyosho Tensionner Spring- UM124
Kyosho Ball Diff. Screw Set - LA208
Kyosho Diff. Gear Set - UM509
I am wondering is that diff screw is the correct one or should I get the RB6 one (TF120)?
Also is the gear diff UM509 needed as it has a diff supplied in the kit listing?
http://miponline.com/store/mip13165.html
Cheers for any help
All those parts are correct. Unfortunately out of the um509 your only using the little white t thing that the nut sits in that goes into the outdrive.
I actually used all those parts from my stock kyosho ball diff.
Tech Master
iTrader: (13)
Thanks for the info/confirmation I will just grab the little T thing from a spare diff I have since that's all I need from that part.
Tech Master
iTrader: (83)