Jeff Werner

iTrader: (30)

The only GHEA pistons I could find for the 210 were all 6 hole at Absolute. Does Nick ship to the US and which pistons did you guys order since he has all kinds.

Thanks

BOLISARIO

iTrader: (57)

Is the slipper clutch bearing still seizing prematurely on the 210? If so, what are ways to prevent it from happening?

Dog Runner

iTrader: (23)

Is there anywhere I can get an aluminum rear toe block that has 3' toe and zero anti-squat?

AMorgan

iTrader: (5)

I'm curious if anyone else is having the same problem I am; I keep breaking front C-Hubs. I've broken 4 now and they all had one thing in common, they all had a void in the mold just below the camber mounting holes. I believe this void is weakening the part and creating most of my issues. Is anyone else breaking these with some regularity? The car will usually take some decent hits without issue, but this one piece is a pretty regular race ender for me and it's usually on a small hit. Any thoughts/solutions would be appreciated.

Jonny5

iTrader: (19)

Yes Nick ships to US. I ordered 2, 3, 4, and 5 hole, all 1.0 holes. I can open them up myself that way. He seems to only ship once a week, so depending on when you order it may a week or two.

I believe TSR and RCJunky1 on here both make them.

JeremyHarris

iTrader: (1)

TSR makes one and they're always quality.

Garnold

iTrader: (51)

Guys I'm selling these AE spur gears and just realized that I might be able to use them on my 210 and 410 if I bore out the centers correct?

http://www.rctech.net/forum/r-c-item...l#post11020475

Matt Howard

iTrader: (6)

That's what I did to a couple spur gears to be able to run 17.5. Just don't over bore the hole, even being slightly over-bored will affect gear mesh. Don't ask me how I know

skrichter

iTrader: (13)

Can someone tell me the brand/mfr of the stock Durango tires (somewhat nubby) on the box art?

Thx!

Randy_Pike

iTrader: (6)

Dboots

Jonny5

iTrader: (19)

And unless you run on astro or some other type of Euro style surface I wouldn't recommend them. We got some B (soft) Terrabytes as I thought it would be a nice in-between from ifmar studs to ifmar pins and they were absolutely brutal on outdoor dirt. Cush can hang on to a car that's pretty loose and he couldn't even make a lap without spinning out. Too bad, I liked the tread on them.

skrichter

iTrader: (13)

Thx. Found them at various online shops.

Couldn't find the fronts though. Suggestions?

Found @ Tower. Thx

mxracer458

iTrader: (47)

What's the biggest complaint of this car?I see that the sc and stadium truck come with the plastic chassis,they have one for the buggy? Seems like alot of money is being spent on hop ups which can make this car costly.Ive checking these cars out but I don't want a 300 dollar car being a 600 dollar car

Fred Perkins

iTrader: (264)

Do you know if he cut down the axle? I have to use a lot more spacers than that.

Slimsh8t

iTrader: (39)

[QUOTE=Jonny5;11020409]Yes Nick ships to US. I ordered 2, 3, 4, and 5 hole, all 1.0 holes. I can open them up myself that way. He seems to only ship once a week, so depending on when you order it may a week or two.


How can I get Nicks info to order from him ?

Thx,
Kevin