Kyosho Lazer ZX-6 & ZX-6.6 4WD Thread
|
|||
#1313
Shock pistons
what is the original size of shock pistons that comes with the kit?
#1314
1.6 two hole front and rear.
#1315
#1316
Tech Initiate
Join Date: Mar 2012
Location: South Coast RC Ministry of Propaganda, Dorset, England
Posts: 33
I used an LAB03 Vulcan shell which is designed for the ZX-5 SP2008, by cutting it to shape before painting and gluing a few small pieces of foam here and there it can be made to almost completely enclose the car
#1317
Tech Regular
#1319
Tech Initiate
Join Date: Mar 2012
Location: South Coast RC Ministry of Propaganda, Dorset, England
Posts: 33
On the day the above pic was taken I took the pin out after round 1 which made the car a lot easier to drive in the slimy conditions and I ended up winning the A Main
Also if you get the ZX6 it's surprising how many RB6 parts are common such as diff internals, wheels, ball ends etc. which makes stockpiling spares a lot easier (I run an RB6 as well).