Durango DEX210 Thread
#4818
#4819
Tech Champion
iTrader: (14)
Guys, what is the best looking carbon rear shock tower? Broke the stock rear tower today, and ready to upgrade.
Oh, and I keep pulling out the ballstuds on the rear hubs while running the car. Im using longer ballstuds now and use a locknut on the back of the hub.
Anybody ele having this?
Oh, and I keep pulling out the ballstuds on the rear hubs while running the car. Im using longer ballstuds now and use a locknut on the back of the hub.
Anybody ele having this?
#4822
Just got my 210 over the weekend and would some help figuring out the set up for this track. It is hard packed usually run dry with very little dust on top. (we blow it off every other day) Its very high bit when just blow off. Pictures are from a couple weeks ago and it is now completely piped and fun as hell to drive.
#4823
Skid plate options?
Anyone have a good skid plate for the buggy?
#4824
DE is coming out with one for the rear, dont know how soon.
http://www.deracing.net/store/index....te=common/home
I bought a T-Bone for a Losi 22 for the front and modified it to fit.
http://www.t-bone-racing.com/
http://www.deracing.net/store/index....te=common/home
I bought a T-Bone for a Losi 22 for the front and modified it to fit.
http://www.t-bone-racing.com/
#4825
Tech Master
iTrader: (26)
Lol, yeah a power screwdriver is the key. I replaced mine the first time with an Avid but it still happened after two packs. I think I'm getting some binding when I snug down the 3 screws that hold the motor plate which is putting too much pressure on that little bearing. I might try shaving a bit off the layshaft spacer and see if it frees it up a bit.
#4827
A small drop of CA works great until you get the tresrey hexes- they are excellent pieces! Demand for them was so high that we were only able to get one pair so far, but they go right on and include all necessary shims and a new pin as well. Another top notch product from Tresrey!
#4829
Tech Regular
#4830
Tech Master
iTrader: (26)
Everyone give a big congrats to Raul Garcia on joining Tresrey USA as a sponsored driver.
http://tresreyusa.blogspot.com/2012/...esrey-usa.html
http://tresreyusa.blogspot.com/2012/...esrey-usa.html