Marcos.J

iTrader: (239)

or gear it correctly

|<R1Z |>

iTrader: (5)

lol. nice

BillyCaldwell

iTrader: (32)

MarcosJ

Do you have a pic of how your modded your motor mount?

jimbobmahua

Hi guys,

Can any of the guys who already own the Moorespeed WCE cyclone tell me whether it comes with a front 1 way, and centre 1 way too?

Thanks

2-Bad

iTrader: (24)

Yes it does....

Marcos.J

iTrader: (239)

here is where i took material off



and made the motor mount holes a little bigger , now i can go as low as 22 pinion with a 108 spur

Marcos.J

iTrader: (239)

or you can just install a 110 spur

BillyCaldwell

iTrader: (32)

My LHS only had a 106, so that sorta worked, but I really needed to drop a tooth or two more on the pinion. Thanks for the pics.

jimbobmahua

Thanks "2-Bad"
Just waiting for the LHS to get their shipment, and then it will be time to spend some more $$

BillyCaldwell

iTrader: (32)

Someone a few pages back mentioned a "fix" in the works for the steering system. Any update on that? This is in regards to the really thin walled aluminum piece in the servo saver.

stephen hilton

hi guys i need some quickfire info as iam racing tommorow night . do you know how to solve fishtailing eg not enough rear end grip brought the shocks in 2 holes and running silver rollbar rear copper front spool upfront any ideas? cheers stephen

Marcos.J

iTrader: (239)

whats the rest of your setup?

Dan Hughes

What size spacer under rear inner camber link?

stephen hilton

err 4owt front 45rear
akerman4mm
shocks in 3 holes back
out 4 holes front
1.5 mm front toe
2mm rear
std everything else

Marcos.J

iTrader: (239)

asphalt?