Diggity Designs Custom R/C Components
#301
Tech Champion
Very nice looking cars...would like to see more detailed pics of the pivot if possible.
#302
Tech Fanatic
iTrader: (4)
The "DIGGITY DESIGNS" car's (plural) look dialed. The rear pivot is very unique, not your typical pivot ball setup. Being able to move the cell weight left to right on the cd12 is really neat for people who have oddball sized electronics. Instead of adding weight you can just move the batteries a bit. You cant go wrong with Quasi-Isotropic Graphite either. No tape, no o-ring to tweak your car, perfect!
Good luck with your new cars DAMON, cant wait to get mine!!!!!
Good luck with your new cars DAMON, cant wait to get mine!!!!!
#303
Tech Regular
Diggs- Sorry bro. My pre- and post-Cleveland life has been chaotic, to say the least. You're still my favorite racer from Freemont, MI. Get a hold of me tonight if it's not too late.
#304
Originally Posted by Dave G
The "DIGGITY DESIGNS" car's (plural) look dialed. The rear pivot is very unique, not your typical pivot ball setup. Being able to move the cell weight left to right on the cd12 is really neat for people who have oddball sized electronics. Instead of adding weight you can just move the batteries a bit. You cant go wrong with Quasi-Isotropic Graphite either. No tape, no o-ring to tweak your car, perfect!
Good luck with your new cars DAMON, cant wait to get mine!!!!!
Good luck with your new cars DAMON, cant wait to get mine!!!!!
Damon
#305
Tech Elite
iTrader: (10)
Join Date: Dec 2003
Location: ~ Stuck in ~ Maryland ~ For Now
Posts: 2,438
Trader Rating: 10 (100%+)
HOT DIGGITY !
Originally Posted by Diggity
All you 1/12th cats!!
Wanted to let everyone know that we have been designing 2 new 1/12th kits! Yep not 1 but 2 kits! There is the improved and redesigned popular D12 version labeled the 3D12 that has the mid battery layout with adjustable battery positioning. There is the classic rear battery layout edition with adjustable battery positioning labeled the CD12. Both kits have an all new rear pod design that uses the proven CRC side springs and a brand new mid pivot design only found here at Diggity Designs! Both kits are all new chassis designs!! The servo position has been revised to allow for the turnbuckles to have proper angle! There is a front cutout in the chassis for the AMB transponders that are comonly used in the RC industry but our cutout includes a small strip of carbon fibre still in the cutout for those people, like some I know, that have cut the side tabs off of their AMB transponders. This small strip can be cutout with a dremel in about 30 seconds for those who have a new or noncut AMB transponder. These kits will be available in January 2007 and they will be complete kits only! Here are a couple exclusive prototype pics!
Wanted to let everyone know that we have been designing 2 new 1/12th kits! Yep not 1 but 2 kits! There is the improved and redesigned popular D12 version labeled the 3D12 that has the mid battery layout with adjustable battery positioning. There is the classic rear battery layout edition with adjustable battery positioning labeled the CD12. Both kits have an all new rear pod design that uses the proven CRC side springs and a brand new mid pivot design only found here at Diggity Designs! Both kits are all new chassis designs!! The servo position has been revised to allow for the turnbuckles to have proper angle! There is a front cutout in the chassis for the AMB transponders that are comonly used in the RC industry but our cutout includes a small strip of carbon fibre still in the cutout for those people, like some I know, that have cut the side tabs off of their AMB transponders. This small strip can be cutout with a dremel in about 30 seconds for those who have a new or noncut AMB transponder. These kits will be available in January 2007 and they will be complete kits only! Here are a couple exclusive prototype pics!
Your adjustable battery positioning will help alot of racers with distributing
the weight to the side they need it and helping the tweak Great Idea ! And your new mid pivot design on Both kits looks pretty Slick ! No breaking of the T plates ! Priceless ! ! !
Hope I can get one before the birds ! You still going this year ?
#307
Originally Posted by Bad-Andy
Hey Damon,
What about us guys who just got the D12V2? It's cool that cars improve and get better, but to buy a newly released kit and have it discontinued by 2 newer and completely different versions in three months sucks.
Andy
What about us guys who just got the D12V2? It's cool that cars improve and get better, but to buy a newly released kit and have it discontinued by 2 newer and completely different versions in three months sucks.
Andy
Andy, Hey bro, sorry about that its just that we are moving on and making better products! I dont think we will discontinue any of these new ones for awhile ! I did give you a discount on the first kit and although you decided to run a different car anyway, I can hook you and anyone up who has purchased the D12V2 with 50% off what ever the conversion kit will be! Just email me or let me know.
Later, Damon
#308
you say they will come in silver and black? do you mean the carbon or the aluminum? i hope it's the carbon....i'm not to partial to the SSG type material.
#310
Here are some pics of the 18t oval car I built for a friend of mine. Build went really well and the chassis looks great. Any possability of making some CF body mounts like the aluminum ones I made? I have had alot of ppl from the forums asking me to make them some. And I just dont want to. lol One thing it could really use would be an extension in the front to mount a bumper to. You then of course make a cool bumper with the body mounts on them in the front.
Was a pleasure to build such a cool little car thanks.
Was a pleasure to build such a cool little car thanks.
#311
Speedie: Great looking Oval kit. Thanks for posting the pics, I like the rear wing on the body
I dont see the mounts being a problem to make. I can have something available by next weekend. If you want to send the people that want it to our website then I will make sure to have them posted by next weekend!
Thanks again, Damon
I dont see the mounts being a problem to make. I can have something available by next weekend. If you want to send the people that want it to our website then I will make sure to have them posted by next weekend!
Thanks again, Damon
#312
Originally Posted by TENCHO
you say they will come in silver and black? do you mean the carbon or the aluminum? i hope it's the carbon....i'm not to partial to the SSG type material.
Since the kits will be available as conversion kits and full kits we are not going to be anodizing the kits aluminum. The kits will be in silver aluminum and most likely will be compilated with CRC aluminum parts.
Damon
#313
Originally Posted by Diggity
I dont see the mounts being a problem to make. I can have something available by next weekend. If you want to send the people that want it to our website then I will make sure to have them posted by next weekend!
Thanks again, Damon
Thanks again, Damon