germanopm

Hi guys

What is the maximum dimension suitable of the battery in this car?

jpas

iTrader: (1)

It's very easy to setup and drives really nice. I have an mbx7 & mp9(tki4). After around 8 full packs the e817 gains rear traction and handles really nice.

Seems pretty durable except for the center front chassis brace, I have a slight bend in it, I'll try the vrp one.

jpas

iTrader: (1)

140mm x 48mm x 48mm

germanopm

Thanks!

Thomas2225

I doubled up the stock orange chassis brace and haven't bent one since

jpas

iTrader: (1)

Are you running two? One on top & one under?

Thomas2225

Yes

dan2721

iTrader: (9)

Hello to all,

anyone has a spare rear diff ring gear and input gear i can buy from.

jpas

iTrader: (1)

Absolute has the ring gears in stock and you can buy the input gear here:

HB RACING Diff Input Pinion Gear 43-10 V2 E817 D817T - Answer RC Ltd.

Shipping from the UK is only $5

mebolson

iTrader: (41)

I have run the Mugen for years and recently picked up an E817. Both fantastic cars. The E817 felt more planted to me. I immediately was comfortable with it and was turning the same and better lap times right away.
E

nanoverse

Great buggy, Just a tip to try. Run emulsion and 6x1.3/1.4 with light oils.

brokenmoto

iTrader: (1)

So my speedo(HW) is temping out and my motor is quite a bit cooler. Am I undergeared?

jpas

iTrader: (1)

What size pinion are u running. ESC temps go up with high current loads.

stalyoni

iTrader: (2)

You should be running at least a 19 tooth pinion at bare minimum

Adim_X

iTrader: (16)

Are any of you guys running low profile batteries? If so, how are you mounting them?