MUGEN SEIKI MRX5
#871
Actually there is one more major change not mentioned above. The floating radio tray option is not used. Instead two screws are used just outboard of where the bearings would be to hold the radio tray fixed in position.
#873
The FEMCA was held in Hong Kong on the Weekend with drivers from Korea, Malaysia, Thailand, China, Macau, Singapore and Hong Kong. 14 rounds total.
I had a blast running the MRX5. Also having YURUKI san( FUKUDA mechanic) set up help and as pit man, it was RC made in heaven!
First no more Radio glitch run away issues we had. Also I think is our track and driver stand n covers all made from metal so caused more problems then most. I know Japan have reports similar problem when driver stand and covers made from metal.
Friend of my MRX5 TQ the race but the steering rod came loss, ended his race.
All the MRX5s at the track were running fast including my.
I had good chance to move up A final from semi but drivers mistake so I ended 4th at semi. I recorded the 2nd fastest lap of the day so very happy with the car. Also very durable, good for guys like me
One thing I learn from Yuruki was the rear roll bar should be adjusted to move freely. If not, use the 2 collar and turn 1 of them at a time until the bar is free, if not free again, try different position roll it up or down until bar is free.
I had a blast running the MRX5. Also having YURUKI san( FUKUDA mechanic) set up help and as pit man, it was RC made in heaven!
First no more Radio glitch run away issues we had. Also I think is our track and driver stand n covers all made from metal so caused more problems then most. I know Japan have reports similar problem when driver stand and covers made from metal.
Friend of my MRX5 TQ the race but the steering rod came loss, ended his race.
All the MRX5s at the track were running fast including my.
I had good chance to move up A final from semi but drivers mistake so I ended 4th at semi. I recorded the 2nd fastest lap of the day so very happy with the car. Also very durable, good for guys like me
One thing I learn from Yuruki was the rear roll bar should be adjusted to move freely. If not, use the 2 collar and turn 1 of them at a time until the bar is free, if not free again, try different position roll it up or down until bar is free.
Just purchased a MRX5 and was wondering is there any starting setup for ACO track which I can work from?
#875
Tech Adept
Thanks mugendrew...
#876
I added weights since I used 2 small servos and changed to Grey front spring to get little more steering.
Play with the body mount. I uses Blitz 09 and 20mm forward from bumper work really well.
#877
Tech Rookie
Mrx-5 all show no finish.
can anyone recomend a good clutch spring
Mojo Nick P
Mojo Nick P
Last edited by mojo/nogogo; 10-26-2010 at 09:26 AM.
#878
Tech Elite
iTrader: (19)
Went to the paris race last weekend and saw the mrx-5 not to impressed its fragile as hell. Well Swauger had the tq spot but Scotty Barrera put the pressure on Mike in the first 5 min and made him choke into the piping braking the ill handiling mrx-5. And not 1 factory mugen mrx 5 team driver finished the main nor stayed to watch the rest of it, they put there tail between legs and made excuses all the way home. Warning before you purchase ask about there great customer service or lack there of My only question is where did Mike Swauger and his defective clones finish. Lol. Congrats to Micheal P, Ron C and Brad T for a 1 2 3 finish. Scottty Barrera looked like the class of the feild forcing Swauger to slam his car into the piping early in the race I feel that Mike S is on his way down just doesnt seem to have the edge anymore and was very rude to me on the phone as I had questions but would not answer them therefor I am still trying to purchase the fastest car with good to great service.
Mojo Nick P
Mojo Nick P
#879
Tech Rookie
Joke
I am getting a new transmitter what one is the best.
Last edited by mojo/nogogo; 10-26-2010 at 09:27 AM.
#880
Tech Master
iTrader: (1)
obviously the car has potential for Mike to get TQ, i doubt it was an ill handling MRX5. as far as being Rude to you, i wouldnt doubt it, specially if you showed the signs of Arrogance, and the slander to go with it, that you have just shown now for everyone to see. i have seen the 5 go at the hands of one of the best in AU, and it is far from an ill handling car. so id pull ya head out of ya Ass , and go go Find ya Mojo else where
#881
At my local track MRX5 is definitely faster than MRX4X. Maintenance wise it's so far about the same. Maybe it's temperature? (still 20'c here)
#882
Tech Master
iTrader: (1)
mojo/nogogo, WOW!!!!! before you slam everybody, please do not include everybody that drives the Mugen car in the A main and people you don't know. You sound like a bitter little RICHARD that didn't get his way. "Defective clones finish" I take this personal. I stayed for the race and so did everybody that was in the A main that broke. What did you do, you drove from Virgina to hang out with the family at the track just to watch one of the best drivers in the WORLD Mike Swauger race, that was the smartest thing you have done yet, I hope you learned something. All I know over a dozen of racers came to him and asked questions and ask for parts, he didn't once hesitate to help or give FREE parts to everyone that asked and needed them for there car. There is no less than 2 USA factory drivers that would do that, give free parts, trust me. If you have a problem with Mike, be a real man and call him and talk to him. Don't bring other racers into your small minded world and put them down. If you have a problem with me e-mail me and we will chat since you involved me in your statement.
Let the thread go back to MRX-5 and how nice the car is.
MY2CENTS
Let the thread go back to MRX-5 and how nice the car is.
MY2CENTS
Last edited by YLLIB; 10-26-2010 at 07:17 PM.
#883
Tech Champion
iTrader: (91)
mojo/nogogo, WOW!!!!! before you slam everybody, please do not include everybody that drives the Mugen car in the A main and people you don't know. You sound like a bitter little RICHARD that didn't get his way. "Defective clones finish" I take this personal. I stayed for the race and so did everybody that was in the A main that broke. What did you do, you drove from Virgina to hang out with mommy at the track just to watch one of the best drivers in the WORLD Mike Swauger race, that was the smartest thing you have done yet, I hope you learned something. All I know over a dozen of racers came to him and asked questions and ask for parts, he didn't once hesitate to help or give FREE parts to everyone that asked and needed them for there car. There is no less than 2 USA factory drivers that would do that, give free parts, trust me. If you have a problem with Mike, be a real man and call him and talk to him. Don't bring other racers into your small minded world and put them down. If you have a problem with me e-mail me and we will chat since you involved me in your statement.
Let the thread go back to MRX-5 and how nice the car is.
MY2CENTS
Let the thread go back to MRX-5 and how nice the car is.
MY2CENTS
#884
Just don't let him give us Virginia racers a bad name. Most of us are cool, even if we did switch to Shepherd