hanulec

iTrader: (28)

That looks like a Roche or litemods spool.

vabroom

Litemodz and I think you need a Yokomo pulley since it has a 3 bolt mount to TOP's 4 bolt mount.

Ron Goetter

iTrader: (17)

I'm running all the top aluminum option parts(tie rods, Pivot balls & arm mounts) as well as lundsford screws w/ SXX Stock spec, rev tech pack bat weights in at 1330 w/ no lead. have only ever broke 1 tie rod (and it was a hard hit on carpet) since September.

smilekt

iTrader: (13)

need help

anyone have setup for high speed Corner long sweeper & semi technical infield

Track surface asphalt low grip to mid

Bishop

iTrader: (5)

Anyone know if Yokomo shafts/CV's will work in the Photon ok?, I really need to dump the stock alloy front and rears (all that came in my kit) and switch to steel, Yoko ones are like half the price of the Top from where I'm buying...

Professor

iTrader: (12)

yes it is & yes you do need the yok pulley,i have these in my 2 photons & they are almost bullit proof (not cheap though)

MikeXray

iTrader: (73)

The axles are the same from stock to steel, so you really only need the bone, amain sells the bone itself for $8.50 each, that's more than reasonable and they last a long time. If you are running a spool though, you will really want to go the ECS route, pricey but worth it...

pakk

iTrader: (80)

would it be too much to ask for someone to weight one of the aluminum pivot balls?

bkspeedo

iTrader: (5)

Why is everyone so keen on making there car lighter? The car is already to light and you have to add weight. The parts your replacing are so light to begin with i doubt you will feel any difference in performance.

If your looking at going faster work on setup and driving skills, making your car lighter is not going to help.

Ron Goetter

iTrader: (17)

Its about a 4 aluminum to 1 steel ratio. I did weigh the 2 but I don't remember the exact weight

hanulec

iTrader: (28)

unless your a drug dealer it is hard to have a scale to weight just one of those balls. when i finally do up a whole car w/ aluminum balls i'll pull out 26 steel balls and weight them against 26 aluminum balls.

Mike Haynes

iTrader: (2)

I got a scale that goes to .1 gram, can bring to jackson sat if you like...and before you say it i bought it for mini z parts

Ron Goetter

iTrader: (17)

Any questions?

stiltskin

iTrader: (103)

Yeah. you got any of that good stuff left? I'll meet you on the playground beside the monkey bars.

Ron Goetter

iTrader: (17)

nope I have that scale from back in my oval days and more recently when I thought a 4 scales would be better then a tweak station.