Schumacher Mi5
#1606
What about some play in front hubs....normal? Horizontal movement.
#1607
Tech Elite
iTrader: (102)
Join Date: Dec 2004
Location: Far away from Covid19 but close to 20
Posts: 4,129
Trader Rating: 102 (100%+)
I have a little play in the front hubs...I did shim the outer hinge pins to remove some of it...just enough not allow binding up...
the play from the bearings so far is okay.
make sure to check the top ball stud to make sure it doesn't get loose....had one go bad after I got clobbered on the track.
the play from the bearings so far is okay.
make sure to check the top ball stud to make sure it doesn't get loose....had one go bad after I got clobbered on the track.
#1608
Tech Regular
Just cut my front wishbones, and I am looking foreward to see If I can noticed the different. How did I work out for your guys there allready have tried it ?
#1609
Tech Elite
iTrader: (102)
Join Date: Dec 2004
Location: Far away from Covid19 but close to 20
Posts: 4,129
Trader Rating: 102 (100%+)
TI ball studs.
hope someone knows this one....
I want to order the Core RC TI ball stud set..
does anyone know what the weight difference/savings would be
standard kit ballstud vs TI ballstud set (part number: CR283)
I want to order the Core RC TI ball stud set..
does anyone know what the weight difference/savings would be
standard kit ballstud vs TI ballstud set (part number: CR283)
#1610
Just want some help iv had my mi5 a few months now it's a great car I race indoors on medium to high grip carpet average lap times are around 9 to 10 seconds a lap I'm running 13.5 boosted on a prity standard kit set up with a spool in the front I'm getting a lot of power on oversteer when coming out of slow corners I'm losing a lot of time with the back end very loose any suggestions
#1611
Tech Addict
Just want some help iv had my mi5 a few months now it's a great car I race indoors on medium to high grip carpet average lap times are around 9 to 10 seconds a lap I'm running 13.5 boosted on a prity standard kit set up with a spool in the front I'm getting a lot of power on oversteer when coming out of slow corners I'm losing a lot of time with the back end very loose any suggestions
works pretty good.
#1612
Tech Rookie
wildthing parts
ive just purchased the wildthing parts for the mi5, could some one confirm how to fit the rear brace and also on the wishbone ends i take it the shocks screw into the new ofset holes?
#1613
Yes, the reoriented holes are intended for the lower shock mounting.. Hope it helps..!
..p
#1614
Tech Elite
iTrader: (102)
Join Date: Dec 2004
Location: Far away from Covid19 but close to 20
Posts: 4,129
Trader Rating: 102 (100%+)
where can I buy the wildthing option parts?
i'm looking for the arms and shock mounts.
#1615
Tech Addict
You can order them thru RC Discount. Phill keeps the Schuey stuff in stock. I highly recommend purchasing the wild things shock mounts, and also the new 2 mm chassis with the braces. It really makes a difference. Especially on asphalt.
#1616
Tech Elite
iTrader: (102)
Join Date: Dec 2004
Location: Far away from Covid19 but close to 20
Posts: 4,129
Trader Rating: 102 (100%+)
went on their webpage but I don't see any of the items...
and don't see a number to call.
#1617
#1619
i plan on testing the rear stiffen braces on the stock chassis then the 2mm chassis along with rear stiffen braces and wild thing shock mounts this weekend on both
#1620
Tech Rookie
cut front arms
could some one also explain wher you cut the front arms and the advantages in doing this,
thanks
thanks