Hpi Pro 4
#6286
Tech Champion
iTrader: (22)
Rookie solara-
I came in second at the last Tinley park big race with this
front
40 shore tire
35 wt #5
2nd hole in on tower
outside hole on arm (you can run this if you run steering arm as bleow)
Losi black? 25 lb spring
6* caster
camber link on inside hole
3mm spacers under ball end
1* camber
black sway bar
forward hole on steering arm
1.5 or 2mm spacer on susp. mounts
you may want to run .5mm kick up
1.0 toe block
0* toe at wheels
rear
37 shore tire
35 wt #3
all the way out on tower
middle hole on arm
1* camber
camber link on inside hole at chassis
inside hole on hub
3mm spacer under ball end
susp. mount flat on chassis
again, you may want to add a small amount of anit squat
no rear swaybar
hubs all the way back
2 diffs
ran the center post (you may want to try to run w/o it)
102 spur33 or 34 pinion w/ 9 turn epic
tires around 59 mm
you may want to try the rear camber link out on the hub
raising and lowering the camber link is a good fine tuning adjustment
I think KevinK ran very similar to this, he gave me a lot of advice and help. Big ups to Kevin! i'm sure he can correct me if I'm wrong
This is for med traction asphalt (sprayed parking lot) Hope it helps
I came in second at the last Tinley park big race with this
front
40 shore tire
35 wt #5
2nd hole in on tower
outside hole on arm (you can run this if you run steering arm as bleow)
Losi black? 25 lb spring
6* caster
camber link on inside hole
3mm spacers under ball end
1* camber
black sway bar
forward hole on steering arm
1.5 or 2mm spacer on susp. mounts
you may want to run .5mm kick up
1.0 toe block
0* toe at wheels
rear
37 shore tire
35 wt #3
all the way out on tower
middle hole on arm
1* camber
camber link on inside hole at chassis
inside hole on hub
3mm spacer under ball end
susp. mount flat on chassis
again, you may want to add a small amount of anit squat
no rear swaybar
hubs all the way back
2 diffs
ran the center post (you may want to try to run w/o it)
102 spur33 or 34 pinion w/ 9 turn epic
tires around 59 mm
you may want to try the rear camber link out on the hub
raising and lowering the camber link is a good fine tuning adjustment
I think KevinK ran very similar to this, he gave me a lot of advice and help. Big ups to Kevin! i'm sure he can correct me if I'm wrong
This is for med traction asphalt (sprayed parking lot) Hope it helps
#6287
Tech Champion
iTrader: (32)
Join Date: Aug 2001
Location: In a land of mini-mighty mental giants
Posts: 8,854
Trader Rating: 32 (100%+)
thanks Rob.....your car was very good aswell last time out. I just wish I would have had parts to fix mine that weekend. What Springs were you running in the rear Losi Purples maybe?
For Gearing I ran 36t with the 96 spur with an 8 turn Epic.
For Gearing I ran 36t with the 96 spur with an 8 turn Epic.
#6289
Tech Apprentice
Hi Thad,
Can please mail me ,what spring are u using and what piston shock oil are u using thanks
Can please mail me ,what spring are u using and what piston shock oil are u using thanks
#6290
Tech Apprentice
Thad,
We met at HPI changelle 2002 at NAGOYA still remember ?
We met at HPI changelle 2002 at NAGOYA still remember ?
#6291
Originally posted by Skill
Looks like Hara is running carbon fibre camber link mounts, but just carbon fibre which fits over the stock mounts. He's also running purple spring perches
Also, does anyone know what those purple bits are on his steering knuckles?
Looks like Hara is running carbon fibre camber link mounts, but just carbon fibre which fits over the stock mounts. He's also running purple spring perches
Also, does anyone know what those purple bits are on his steering knuckles?
#6292
Tech Initiate
in that picture hara isn't using the wheel spacers. is that ok?
#6293
Originally posted by peachpie
in that picture hara isn't using the wheel spacers. is that ok?
in that picture hara isn't using the wheel spacers. is that ok?
#6294
Originally posted by acutts
Does anyone know how Hara attached the washers to limit the travel on the steering?
Does anyone know how Hara attached the washers to limit the travel on the steering?
#6295
Originally posted by Eirik
I used superglue, I assume Hara did as well....
I used superglue, I assume Hara did as well....
Thanks ....What washers did you use?
Cheers
#6296
just got my delin outdrives today and the feel pretty smooth
chris
chris
#6297
Registered User
Hara's car at Nat.
#6300
Originally posted by Speed Demon
Hi.. can I use the spool on the asphalt track??? or is it used on carpet track only...?? cheers
Hi.. can I use the spool on the asphalt track??? or is it used on carpet track only...?? cheers