4LikesNEW HOBBYWING STOCK SUPERCHARGED SOFTWARE
12-23-2011, 09:54 AM
#7306
Just tried the 930, seem to me that it didn't make too much difference at all.
Will test on the track again, but giving it some air acceleration seems the same.
Hope on the track it shows some difference.
Will test on the track again, but giving it some air acceleration seems the same.
Hope on the track it shows some difference.
12-23-2011, 09:59 AM
#7307
You need to post as much information as possible before anyone can give you an educated guess on setup.
Cheers,
Shawn.
12-23-2011, 10:00 AM
#7308
Tech Regular
12-23-2011, 10:01 AM
#7309
Like many big kids at Christmas i have Santa's money burning a hole in my pocket. Unfortunately for HW an Orion R10 pro is coming my way but at least hobbywing made some money out of me OEM style instead of all of it as i would have preferred to be bolting in a new V3.
Everyone can rest assured now that i have made this purchase the new V3 will be released shortly
Everyone can rest assured now that i have made this purchase the new V3 will be released shortly
Im with you on this! I was waiting for the V3, but our big indoor race is coming in 2 weeks, so I broke down and bought another 120A 1S. Turns out it didnt make the wife happy, buying to many things for myself near Xmas!
Happy Holidays,
Shawn.
12-23-2011, 10:11 AM
#7310
Here it goes:
1 Running mode: For/Brake
2 Drag brake: 0%
3 Voltage prot: 3.0V/Cell
4 DRRS Punch: Level 9
5 Brake force: 50%
6 Reverse force: 25%
7 Initial brake: 0%
8 Neutral range: 6%
9 Boost timing: 36
10 Turbo slope: 18
11 Overheat prot: Enable
12 Turbo timing: 24
13 Start RPM: 4000
14 Turbo delay: 0,3 sec
15 Timing ACC 350
12-23-2011, 10:12 AM
#7311
12-23-2011, 10:16 AM
#7312
Funny thing is, just turned it on now and shows
"Hobbywing"
V1.07_110119
Them when I press ok it shows the esc version that is the 930, is it normal?
Another thing is that I am using the SP Pro LCD, is that a problem?
"Hobbywing"
V1.07_110119
Them when I press ok it shows the esc version that is the 930, is it normal?
Another thing is that I am using the SP Pro LCD, is that a problem?
Last edited by Fabricio; 12-23-2011 at 10:29 AM.
12-23-2011, 11:13 AM
#7313
i think the V1.07_110119 is the LCD programming card version. you could also upgrade the programming card to V1.08XXX from the hobbywing USB link 1.64
the ESC version yes is the XXX930 version.
i think it's a normal
12-23-2011, 11:28 AM
#7314
Tech Apprentice
Where have all the Hobbywing download sites gone?
Hi,
I recently have been running my Extreme Stock ESC in blinky mode.
I want to start running in advancing mode and have spent some time today trying to find the download link for it.
I've tried several of the links posted here but they all return the browser code 504.
Can anyone post a working link for me.
Also since I am moving from blinky can someone suggest settings that are faster but gentle.
Thanks in advance
I recently have been running my Extreme Stock ESC in blinky mode.
I want to start running in advancing mode and have spent some time today trying to find the download link for it.
I've tried several of the links posted here but they all return the browser code 504.
Can anyone post a working link for me.
Also since I am moving from blinky can someone suggest settings that are faster but gentle.
Thanks in advance
12-23-2011, 12:24 PM
#7315
Hi,
I recently have been running my Extreme Stock ESC in blinky mode.
I want to start running in advancing mode and have spent some time today trying to find the download link for it.
I've tried several of the links posted here but they all return the browser code 504.
Can anyone post a working link for me.
Also since I am moving from blinky can someone suggest settings that are faster but gentle.
Thanks in advance
I recently have been running my Extreme Stock ESC in blinky mode.
I want to start running in advancing mode and have spent some time today trying to find the download link for it.
I've tried several of the links posted here but they all return the browser code 504.
Can anyone post a working link for me.
Also since I am moving from blinky can someone suggest settings that are faster but gentle.
Thanks in advance
http://www.hobbywing.com/upload/soft....64_111011.rar
12-23-2011, 12:51 PM
#7316
Temp around F131 guess its okay
I will be gearing down to 6.4 at least
i went to the local cycling track this morning
just to bash around gps strapped on 82.5 km/h
top end on a very short straight incredible
12-23-2011, 01:52 PM
#7317
Shawn, below is the speedo setup, I upgraded it to the 930, didn't changed anything on it.
Here it goes:
1 Running mode: For/Brake
2 Drag brake: 0%
3 Voltage prot: 3.0V/Cell
4 DRRS Punch: Level 9
5 Brake force: 50%
6 Reverse force: 25%
7 Initial brake: 0%
8 Neutral range: 6%
9 Boost timing: 36
10 Turbo slope: 18
11 Overheat prot: Enable
12 Turbo timing: 24
13 Start RPM: 4000
14 Turbo delay: 0,3 sec
15 Timing ACC 350
Here it goes:
1 Running mode: For/Brake
2 Drag brake: 0%
3 Voltage prot: 3.0V/Cell
4 DRRS Punch: Level 9
5 Brake force: 50%
6 Reverse force: 25%
7 Initial brake: 0%
8 Neutral range: 6%
9 Boost timing: 36
10 Turbo slope: 18
11 Overheat prot: Enable
12 Turbo timing: 24
13 Start RPM: 4000
14 Turbo delay: 0,3 sec
15 Timing ACC 350
I am assuming you are running an FDR around 7.0-7.5 ? I would bring your Boost in at a higher RPM, 8000-10,000, and bring it in ait quicker 300rpm/step. You can bump the boost up alittle more, to 40.
Other than that. I cant see a problem there. Could be gearing, you mentioned you have a hobbywing motor? Maybe someone can chime in, but I have never run one before, but I have heard they like to Rev. So, maybe FDR towards the 8 range.
Shawn.
12-23-2011, 01:57 PM
#7318
Try disconnecting and reconnecting the sensor cable, and see if that changes anything in the rpm from the motor while testing in the air......
If not, I would replace the cable.....
If not, I would replace the cable.....
12-23-2011, 02:51 PM
#7319
http://www.hobbywing.com/index.asp
our new website .Please give us some feedback on the website and if there is anything different you would like to see or any different fucntions you would like implemented .
our new website .Please give us some feedback on the website and if there is anything different you would like to see or any different fucntions you would like implemented .
12-23-2011, 03:07 PM
#7320
Tech Fanatic
Here it is
Hardware Version 427_V1.0
Software V3.0_11090_MOD
Running Mode - Forward Only with Brake
Drag Brake Force - 10%
Low Voltage Cut-Off - 3.0V/Cell
"DDRS" Start Mode - Level 7
Maximum Brake Force - 100%
Maximum Reverse Force - 10% no idea why because it's a forward only
Initial Brake Force - 0%
Neutral Range - 6% Narrow
Boost Timing - 0 deg
Turbo Open Time - 24 deg/0.1 sec
Over-Heat Protection - Enable
Turbo Timing - 10 deg
Boost Start RPM - 1000 rpm this one is greyed out and non adjustable
Turbo Open Delay - 0.4 sec
Boost Timing ACC - 50 rpm/deg this one is also greyed out and non adjustable
Thanks
Hardware Version 427_V1.0
Software V3.0_11090_MOD
Running Mode - Forward Only with Brake
Drag Brake Force - 10%
Low Voltage Cut-Off - 3.0V/Cell
"DDRS" Start Mode - Level 7
Maximum Brake Force - 100%
Maximum Reverse Force - 10% no idea why because it's a forward only
Initial Brake Force - 0%
Neutral Range - 6% Narrow
Boost Timing - 0 deg
Turbo Open Time - 24 deg/0.1 sec
Over-Heat Protection - Enable
Turbo Timing - 10 deg
Boost Start RPM - 1000 rpm this one is greyed out and non adjustable
Turbo Open Delay - 0.4 sec
Boost Timing ACC - 50 rpm/deg this one is also greyed out and non adjustable
Thanks
This is a Speed Passion software, I would recommend to load the HW software on your 2in1 box then the HW ESC software and take the set-up from there.