Turbo9000

iTrader: (5)

I reckon its a .21 of some kind. It came out of a serpent, but could it be a heli or plane engine? Ive never seen on like it.







it has a short threaded crankshaft.

thanks

helivaguy

iTrader: (42)

looks like a old pan car engine,maybe a rossi and they pretty much all had threaded crankshafts.

Roelof

Looks like a Rossi. I have here a Serpent P6 engine based on a Rossi with a same kind of exhaust connection and cooling fins on the crankcase.

The clutch seems a Serpent Quatro.

Wanabrc

iTrader: (70)

Judging by the "R" on the block, I would say it's a Rossi as well.

Turbo9000

iTrader: (5)

Thanks guys.
Roelof, you are right, its a quattro clutch.

The internals are primitive looking. However, i dont think its been run.

How old would you say this engine is?

my guess is about 25 to 30 years old

Roelof

I think arround 1989/1990

Attached a pic of my old P6 engine

Turbo9000

iTrader: (5)

neat! there are some similarities for sure.

I have found specs for serpent "s-power" engine

The crank looks very similar, just shortened i believe.

Roelof

The blackhead was just a model before the purple head but nice to see such information on the net, brings good old memories

martinh

That is a Rossi 3 port motor from 85/86, The S power was later 87/88 which had 7 ports. Both motors made by Rossi (now Axe Rossi). If you decide to sell the motor i would be interested, Please let me know. Martin.

Turbo9000

iTrader: (5)

Ok, yes, it is a 3-port engine.
Internally this engine looks new. would you happen to know, is the sleeve chromed or is it a nickel plate?


once again, thanks for the good info.

Turbo9000

iTrader: (5)

I have pics of the intenals & pipe and header now.

martinh

The liner is chromed, The engine has also deff been run.You can tell by the rub marks around the piston and rub marks around the crankshaft along the 13mm diameter part (between outer and inner ballraces). Regards Martin.

wingracer

iTrader: (24)

Interesting that it has the oil whole in the crank pin. And here most of us thought OS was being innovative when they came out with that.

martinh

Rossi used the oil hole through the pin for about 3 years from around 83-86, Unlike OS which didnt have any oil holes in the rod on the VZB the Rossi rod had 3 oil holes as well as the diagonal hole in the pin. Their rod had one hole through the face of the rod above the big end as rods do today and they had two more holes through the side of the rods big end.Regards Martin.

Wanabrc

iTrader: (70)

I had this ol' thing layin around...............