Bansh88

iTrader: (12)

I picked up a used 8ight. The engine is a Jammin .28. One of the cooling fins is completely broken from the head. It just rattles around. Is there a way to reattach? Should I just try and remove it?

nitroexpress

I would say no and no.

My JPX .28 did the same. I was lucky enough to find a new Picco head for $12.50

Bansh88

iTrader: (12)

Are most heads interchangeable?

New heads cost more than the complete engines I've been picking up

nitroexpress

Some are, some are not. So I wouldn't say most are interchangeable. Different brands coming from the same factory have a better chance of fitting. Example - JPX and Picco are basically the same.

There are after market heads that are made for some engines. Not too many, but a few.

houston

iTrader: (96)

pull it off or just use any head , i have some extra heads laying around for nova engines which i believe fit if you want one , just pay shipping

madweazl

iTrader: (12)

Nice offer, AHole

houston

iTrader: (96)

i know huh

i am anything butt (pun intended) , some types of people in this world who think the world and everybody in it owe them something may think that way but it couldnt be farther from the truth .

i am very opinionated and we do all know what those are like


serious on the head though , if a nova head works on the jammin i will send ya one free , you pay shipping

Bansh88

iTrader: (12)

Thanks for the offer.
Stay outta my posts Weaz unless you got something constructive to say!!!!

Fortunalety/Unfortunately, I have 2 grenaded rossi engines with heads. They appear to be shorter though. This Jammin head is tall.
I'll saw this sucker off and continue on. Just wanted to make sure this wasnt a serious issue.

-R2-

iTrader: (4)

You can use both the Picco P3 or .28 cooling heads on the Jammin engine, they are practically the same engine, you can find some good ones on Ebay for a good price then buying them from retail, the Jammin and Picco heads sell for $95.00 retail new so I would check the ebay.

NitroOB4You

iTrader: (36)

R2- Do you know if the Jammin .21 would be the same bolt pattern or even same head? If so, I am 98% sure I have a couple dead mills buried in my garage, pending his confirmation I will offer the same as Houston, simply pay S/H of your choice.