Team Magic G4
#1276
Tech Elite
iTrader: (4)
Dennis/Ray - Thanks for the hard work that you've put into the car. It's almost ready. I've got several hours to go and I'm waiting on a few things before I go track side. Hopefully I'll have them this week. You guys rock!! Keep up the great work!!!
Congrats to Brian and Boddy and all the Team Magic drivers that were at Toledo this past weekend.
Mark
Congrats to Brian and Boddy and all the Team Magic drivers that were at Toledo this past weekend.
Mark
#1277
Tech Regular
Originally Posted by muppet racing
Hi Motorman,
The track looks good in the video Your weather looks good too
Could you or Brian post his setup from that meeting ?
The track looks good in the video Your weather looks good too
Could you or Brian post his setup from that meeting ?
The car was very good at Toledo. It is a great starting point for someone with a maintained and high traction track as well as smooth.
I'll try to have it up tonight.
#1278
anyone have a good engine/pipe combo for the G4S? an engine not super expensive, but one that can definetly do the job. Sirio Evo anyone?
#1280
Hi Brian,
Yes this is Darren, thanks for that, having seen the video, the setup would provide good info.
The track does look well maintained and very smooth ! those boards look a little unforgiving though !!
There is a set up sheet here,
http://www.cmldistribution.co.uk/pro...n_04_06_06.pdf
from our last national, which was a small track, with many corners (the gearing was for small tyres, so it was slightly wrong for tyre sizes on sheet, ooops !!) on the clutch i used:
1.7mm spring,
2 brass weights (from old clutch, about half the weight of the UFO ones)
0.6mm gap
0.8mm tension
red shoe & weights
the clutch worked well, although not a high grip track, from looking at your video your tracks are very different from most of ours here in the UK.
Thanks,
Darren.
Yes this is Darren, thanks for that, having seen the video, the setup would provide good info.
The track does look well maintained and very smooth ! those boards look a little unforgiving though !!
There is a set up sheet here,
http://www.cmldistribution.co.uk/pro...n_04_06_06.pdf
from our last national, which was a small track, with many corners (the gearing was for small tyres, so it was slightly wrong for tyre sizes on sheet, ooops !!) on the clutch i used:
1.7mm spring,
2 brass weights (from old clutch, about half the weight of the UFO ones)
0.6mm gap
0.8mm tension
red shoe & weights
the clutch worked well, although not a high grip track, from looking at your video your tracks are very different from most of ours here in the UK.
Thanks,
Darren.
#1286
what engine/combos is everyone running in their G4S's?
#1287
The pinion gears on the G4s is it interchangable with Kyosho,Mugen or Serpent ???
#1289
Originally Posted by badKarma
what engine/combos is everyone running in their G4S's?
#1290
Originally Posted by razzor
The pinion gears on the G4s is it interchangable with Kyosho,Mugen or Serpent ???