MUGEN SEIKI MRX5
#1336
#1338
Front upper arm fix?
Going to try this out maybe this wknd I'll let you guys know how it holds up.
CSO if your looking at this why dont you make something like this for the five
CSO if your looking at this why dont you make something like this for the five
#1339
This was made by MSO...#ike WHOOOOOOOOO
#1342
pic not the spacer I feel that the plactic piece cant take the impact of my driving
#1344
#1345
Tech Addict
iTrader: (1)
It doesn't break, it pops off ... it becomes the weak link without destroying anything else. But you have to tag something hard.
In my case hard enough to break the shock shaft and crack the lower A arm, drove it back to the pits.
It is an improvement to the original part that would snap off rather easily, and you probably have all of this stuff in your pit box. Mugen Drew switched his car over sitting next to me at Homestead, told me he sent photos to Mr. Sonata in Japan
Mr. Sonata thought it was well done.
In my case hard enough to break the shock shaft and crack the lower A arm, drove it back to the pits.
It is an improvement to the original part that would snap off rather easily, and you probably have all of this stuff in your pit box. Mugen Drew switched his car over sitting next to me at Homestead, told me he sent photos to Mr. Sonata in Japan
Mr. Sonata thought it was well done.
#1346
spacer came from
I know its not Mugen but I wish they'd make like this or CSO......HELLO!!!!!
Make this also its part of the car too
#1347
#1349
#1350
i dont know bout u guys but i never had the plastic ball end pop off every time i had a problem it was the turnbuckle snaped like a tootpick so i dont think this would solve the issue unless u put a 4mm turnbuckle to make it stronger. i think mugen should just make an alum piece that sits on top were the ball end is now that screws into the a,b,c plate that looks like the bottom of the knuckle and has the hole to put a pivit ball throu like the bottom and just make a new upper arm so u can screw the pivit ball right in problem sloved,