European 2wd 1/8th pan car on-road Classic class
#1397
#1398
Exhaust Problem
Hey guys I got a problem! Trying to finish my "Davis" car with a 3 port NR engine. WEnt to put a header and pipe on it and NO GO! The header hits the tire. Matt, Joe, Rick, anybody, what header can be used on a "modern" engine to clear stuff on an RC 300 car? I ahve a work around but wonder how I got into this situation...
Ned
Ned
#1399
Hey guys I got a problem! Trying to finish my "Davis" car with a 3 port NR engine. WEnt to put a header and pipe on it and NO GO! The header hits the tire. Matt, Joe, Rick, anybody, what header can be used on a "modern" engine to clear stuff on an RC 300 car? I ahve a work around but wonder how I got into this situation...
Ned
Ned
http://www.ebay.com/itm/Rc-marine-Ex...item231490f78a
#1400
Bodies for Pans (Old School)
Guys, sorry I have not gotten this done yet but I keep putting it off and I know time is awastein!!
I'll sent out one more e-mail, hopefully tomorrow, and confirm what is wanted and ask for some $$ up front. We are looking at upwards of $600 and I'm not in a position to front that much. I'll detail my plan in the e-mail and hope it is agreeable to all.
Current List:
Matt 2-Porsche 911 (1085)
Ned 1-Porsche (0084)
1- TOYOTA Celica (0093)
1- BUD (0090)
1-FORD Capri (s0709)
1-McLaren M20 (S0714)
Lon 1-FORD Capri (s0709)
1-Lancia (s0623)
1-Ligier Maserati (S0717)
1-McLaren M20 (S0714)
Joe P. 1-Kroll (0087)
1-Porsche 917 (
Jeff W. 2-Mercedes AMG (s0705)
2-Lola Ford T610 (s0708)
17 total/20 max will minimize the shipping per body (About $70 for up to 20)
I'll sent out one more e-mail, hopefully tomorrow, and confirm what is wanted and ask for some $$ up front. We are looking at upwards of $600 and I'm not in a position to front that much. I'll detail my plan in the e-mail and hope it is agreeable to all.
Current List:
Matt 2-Porsche 911 (1085)
Ned 1-Porsche (0084)
1- TOYOTA Celica (0093)
1- BUD (0090)
1-FORD Capri (s0709)
1-McLaren M20 (S0714)
Lon 1-FORD Capri (s0709)
1-Lancia (s0623)
1-Ligier Maserati (S0717)
1-McLaren M20 (S0714)
Joe P. 1-Kroll (0087)
1-Porsche 917 (
Jeff W. 2-Mercedes AMG (s0705)
2-Lola Ford T610 (s0708)
17 total/20 max will minimize the shipping per body (About $70 for up to 20)
#1401
Hey
.....Ned...I dont know know if there is a factory header that will clear the tire.....if there is,...i want to know what it is..........I took a 180 degree offroad header and cut 90 degrees off..then use a silicone "coupler" to gain your header length back......just like the olden days..............we would almost need a header that sweeps forward as it leaves the engine case..........
http://www.ebay.com/itm/Rc-marine-Ex...item231490f78a
http://www.ebay.com/itm/Rc-marine-Ex...item231490f78a
#1402
Question
Guys, sorry I have not gotten this done yet but I keep putting it off and I know time is awastein!!
I'll sent out one more e-mail, hopefully tomorrow, and confirm what is wanted and ask for some $$ up front. We are looking at upwards of $600 and I'm not in a position to front that much. I'll detail my plan in the e-mail and hope it is agreeable to all.
Current List:
Matt 2-Porsche 911 (1085)
Ned 1-Porsche (0084)
1- TOYOTA Celica (0093)
1- BUD (0090)
1-FORD Capri (s0709)
1-McLaren M20 (S0714)
Lon 1-FORD Capri (s0709)
1-Lancia (s0623)
1-Ligier Maserati (S0717)
1-McLaren M20 (S0714)
Joe P. 1-Kroll (0087)
1-Porsche 917 (
Jeff W. 2-Mercedes AMG (s0705)
2-Lola Ford T610 (s0708)
17 total/20 max will minimize the shipping per body (About $70 for up to 20)
I'll sent out one more e-mail, hopefully tomorrow, and confirm what is wanted and ask for some $$ up front. We are looking at upwards of $600 and I'm not in a position to front that much. I'll detail my plan in the e-mail and hope it is agreeable to all.
Current List:
Matt 2-Porsche 911 (1085)
Ned 1-Porsche (0084)
1- TOYOTA Celica (0093)
1- BUD (0090)
1-FORD Capri (s0709)
1-McLaren M20 (S0714)
Lon 1-FORD Capri (s0709)
1-Lancia (s0623)
1-Ligier Maserati (S0717)
1-McLaren M20 (S0714)
Joe P. 1-Kroll (0087)
1-Porsche 917 (
Jeff W. 2-Mercedes AMG (s0705)
2-Lola Ford T610 (s0708)
17 total/20 max will minimize the shipping per body (About $70 for up to 20)
#1403
Hey
Hey guys I got a problem! Trying to finish my "Davis" car with a 3 port NR engine. WEnt to put a header and pipe on it and NO GO! The header hits the tire. Matt, Joe, Rick, anybody, what header can be used on a "modern" engine to clear stuff on an RC 300 car? I ahve a work around but wonder how I got into this situation...
Ned
Ned
#1404
Bodies
The bodies we are ordering are reproductions (to use a nice term) of old bodies, we intend to run them. If we ever find someone to vacform your templates would be great!!!
#1405
Exhaust Problem
I'd like to see what you have if you could post a pic or two!
Ned
#1406
Exhaust Problem
.....Ned...I dont know know if there is a factory header that will clear the tire.....if there is,...i want to know what it is..........I took a 180 degree offroad header and cut 90 degrees off..then use a silicone "coupler" to gain your header length back......just like the olden days..............we would almost need a header that sweeps forward as it leaves the engine case..........
http://www.ebay.com/itm/Rc-marine-Ex...item231490f78a
http://www.ebay.com/itm/Rc-marine-Ex...item231490f78a
I gotta lot to do to get ready for heading north on Thursday. I plan on testing on Sunday and maybe during the week some to see if I can get things together. How did your testing go yesterday?? Hope y'all had fun!!
Ned
#1407
Thanks Matt. I'll take a look at the headers I have and maybe go to the HS if my idea does not work out. I'll post some pics later to show what I've got.
I gotta lot to do to get ready for heading north on Thursday. I plan on testing on Sunday and maybe during the week some to see if I can get things together. How did your testing go yesterday?? Hope y'all had fun!!
Ned
I gotta lot to do to get ready for heading north on Thursday. I plan on testing on Sunday and maybe during the week some to see if I can get things together. How did your testing go yesterday?? Hope y'all had fun!!
Ned
#1408
Exhaust Adapter Pix
Here are some pix of my "solution" to my exhaust problem. I'll find out soon if it works!! Basically I reversed a standard header, using an adaptor to deal with the different diameters of the engine and pipe.
Last edited by aarcobra; 04-07-2012 at 06:32 PM. Reason: add pix
#1409
#1410