Xray NT1
#7323
Hey guys,
Having a bit of trouble keeping the rear swaybar tight. It keeps freeing up especially on the left hand side. Have replaced grub screws etc. Any tips or tricks greatly appreciated.
Thanks.
Having a bit of trouble keeping the rear swaybar tight. It keeps freeing up especially on the left hand side. Have replaced grub screws etc. Any tips or tricks greatly appreciated.
Thanks.
#7324
Woooooow nt1 thread on page2! Not to many feeling the new car i see! Anyway do any of you know if the front n rear knuckles can b used on the 14spec. I want those wheel disc! From pics the frofront/rear arms look same! Thanks
#7326
whats up Xray people, im a newbie at racing and i just got my first pro kit, im about to start working on it now. any tips equipment and suggestions on parts i should get would be great. i got the xray nt1 "15
thanks a lot guys.
thanks a lot guys.
#7327
Tech Regular
great choice follow inst sheet and set up,use calipers,seal edges of carbon fiber with supper glue etc best to check with locals on motor pipe etc good luck race and practise as much as you can
#7328
thanks mtnman
#7330
im currently on my front a rear gear deff's how much oil should i use. not sure if im putting in the right ammount. is more better than less?
#7331
Go to and watch the video
http://www.capamericarc.com/Tips_ep_43.html
http://www.capamericarc.com/Tips_ep_43.html
Last edited by bluer322; 06-01-2015 at 03:47 PM. Reason: Video
#7332
Go to and watch the video
http://www.capamericarc.com/Tips_ep_43.html
http://www.capamericarc.com/Tips_ep_43.html
I haven't raced yet, but during practice my car is better than its been in a long time. This way you always have the right amount of fluid. The way I used to build them, I never knew if it was enough or too much.
With the same weight I always used, they feel so much different building them this way.
Weather permitting, I will be at Floyd this Sunday. I'm sure a few people will be also. There's plenty of people to help with any questions you might have.
Just build and have fun, or you can get frustrated real fast in the beginning. See you at floyd
#7333
hey guys im using Savox servos on my build, what is the appropriate servo arm?
"K- (23T)"
"H-(24T)"
"F-(25T)"
"K- (23T)"
"H-(24T)"
"F-(25T)"
#7334
#7335
NT1'15 New option parts