Kyosho V-ONE RRR Evo
#2521
Tech Adept
Mr. solo the artist you know you the man , you can call me whenever.
#2522
#2523
#2524
Hi, can someone clarify this point please.
If replacing the front one way with the a diff, can the rear mounted diff be mounted in the front ? Or should be looking at optional part numbers?
Thanks ?
If replacing the front one way with the a diff, can the rear mounted diff be mounted in the front ? Or should be looking at optional part numbers?
Thanks ?
#2525
The front diff has its own case separate from the rear diff...you will also have to use different diff joints than the rear...dif joint #vz218 not sure on the part number for the case but it should be in your manual
hope this helps
#2526
these parts (Front Case) should have come with your kit except for the diff joints and the extra diff gears,and bevel shafts you will need
#2527
ROB Part Numbers VZ204 and VZ012 and shafts and cup joints... right ?
#2528
hmm should have checked the kit, it's there ....
I am missing the shafts only... will check LHS tommorrow, thanks for the help rob...
I am missing the shafts only... will check LHS tommorrow, thanks for the help rob...
#2529
#2530
can anyone advice me which type of clutch assembly suits the Sirio Evo 4? (i) 2D clutch (ii) 3D clutch (iii) 4D clutch or (iv) Sirio clutch? i am having problems with the clutch setup especially on the acceleration...please advice TQVM
#2531
if you can get your hands on a sirio clutch ..I highly recommend
#2532
#2533
#2534
Thanks for that , i'll give it a try. I'm also having some problems with oversteer on power. The car has way more steering than the serpent so i guess i'll have to get used to it , unless you have some sugestions!!
#2535