TQ Racing SX8
#1606
TQ Shocks
Hey guys, I've installed a set of TQ shocks on my Kyosho ST-RR Truggy, but I'm having a problem with the front arms. To get them to a level position, I've had to adjust the pre-load collars all the way down and this just doesn't seem right to me. I'm using 50wt oil with the blue(hard) Jammin springs. Any ideas as to what might be wrong here??? I appreciate any help, thanks!!
The front TQ shocks are shorter then the Kyosho St-rr front Shocks. Kyosho MAKES THREE SIZES IN SHOCKS. Look at it this way small medium and large.
Kyosho buggys use small in the front and large in the back.Kyosho Truggy ST-RR use medium in the front and large in the back.Kyosho buggy front shocks are a bit smaller then the front TQ shocks. The Tq front shocks are a bit smaller then the ST-RR shocks.
#1607
DON TILLEY RACE FOR A CURE April 24-26 At THE FARM II
Wanted to know how many more TQ SX-8 were planning on comeing down or up for this race big event, sure to have 200+ drivers. Luther are you still planning on comeing and are any 09 SX-8 going to be there?
#1608
Don Tilley Race
We are hoping to make the event it is on our schedule for sure.Guys Rc Procenter will be taking pre orders for the SX8 09 right now,I have spoke to the factory and they are building kits as I type.Any racer that has a local shop give us a call and the info to there store and we will get them setup as a dealer.
Guys we also have the new tools and wheels in stock I have tried my best and can not break these wrench tips.
We also have the new wheels,Glow Igniters,Fuel Bottles Wings and other Items on the way so get ready.
Guys we also have the new tools and wheels in stock I have tried my best and can not break these wrench tips.
We also have the new wheels,Glow Igniters,Fuel Bottles Wings and other Items on the way so get ready.
#1609
Send me those tools,i seem to be able to break the unbreakable..lol
#1612
Tech Addict
Curt-- is this setup for a hard packed track? By your choice of springs I am assuming so. thanks
#1613
I looked at Rc procenter for the pre orders and it's not there.
#1614
Bunnell I just spoke with him and it will be up this weekend
#1615
Great man thanks for the help. I run a tank right now MBX5r cant wait to try this buggy out
#1619
Tech Elite
iTrader: (13)
All I can say is wow...great car. No problems, no issues, no little bugs the first time out. Very solid. This car car turns on a dime, that is for sure, and carries so much corner speed. Very easy to click off fast laps. For for anyone in the midwest on a hard pack track...here is what I have so far...
Diffs 5 - 5 - 5
Front
22 deg caster hubs middle hole on hub
second hole back on ackerman plate
1 degree camber
shocks 1.4 45wt oil jammin blue springs
shocks mounted ouside hole in arm and middle hole in tower
Max droop
Rear
hubs centered, hubs down
camber middle in tower, upper outside in hub
shocks 1.3 25wt TQ silver springs, shocks mounted ouside in tower(top) and outside in arm
Misc,
OS Vspec 1.1 springs, AE pipe
Brake bias to the front 60/40, no drag brake.
Diffs 5 - 5 - 5
Front
22 deg caster hubs middle hole on hub
second hole back on ackerman plate
1 degree camber
shocks 1.4 45wt oil jammin blue springs
shocks mounted ouside hole in arm and middle hole in tower
Max droop
Rear
hubs centered, hubs down
camber middle in tower, upper outside in hub
shocks 1.3 25wt TQ silver springs, shocks mounted ouside in tower(top) and outside in arm
Misc,
OS Vspec 1.1 springs, AE pipe
Brake bias to the front 60/40, no drag brake.
#1620
Tech Regular
All I can say is wow...great car. No problems, no issues, no little bugs the first time out. Very solid. This car car turns on a dime, that is for sure, and carries so much corner speed. Very easy to click off fast laps. For for anyone in the midwest on a hard pack track...here is what I have so far...
Diffs 5 - 5 - 5
Front
22 deg caster hubs middle hole on hub
second hole back on ackerman plate
1 degree camber
shocks 1.4 45wt oil jammin blue springs
shocks mounted ouside hole in arm and middle hole in tower
Max droop
Rear
hubs centered, hubs down
camber middle in tower, upper outside in hub
shocks 1.3 25wt TQ silver springs, shocks mounted ouside in tower(top) and outside in arm
Misc,
OS Vspec 1.1 springs, AE pipe
Brake bias to the front 60/40, no drag brake.
Diffs 5 - 5 - 5
Front
22 deg caster hubs middle hole on hub
second hole back on ackerman plate
1 degree camber
shocks 1.4 45wt oil jammin blue springs
shocks mounted ouside hole in arm and middle hole in tower
Max droop
Rear
hubs centered, hubs down
camber middle in tower, upper outside in hub
shocks 1.3 25wt TQ silver springs, shocks mounted ouside in tower(top) and outside in arm
Misc,
OS Vspec 1.1 springs, AE pipe
Brake bias to the front 60/40, no drag brake.
Good to hear your liking the car. I presume your running/using the 09 cars, not the older car? The old buggy did not have a lot corner speed your had to be very cautious.