Frank Root

iTrader: (25)

One thing to keep in mind - if you get an upgrades for your R10, they will be silver and not black - then it won't be matching. I opted for the R10 ATS on purpose, even though if you had ALL BLACK, it would be sick.

Ivan Dickson

iTrader: (32)

That does make sense....I'm still in decision mode.

nikos2002

iTrader: (30)

Ivan - if it helps - I only know of one place that still have a black kit available, they have been sold out by most dealers.

ATS kits are in stock most places that carry ARC, if they not, they can get them from us as needed.

nikos2002

iTrader: (30)

Ivan - if it helps - I only know of one place that still have a black kit available, they have been sold out by most dealers.

ATS kits are in stock most places that carry ARC, if they not, they can get them from us as needed.

Frank does have a point about the black edition - there are limited replacement parts in black, it was done only as a special edition.

Frank Root

iTrader: (25)

Does anyone local to Southern California want a Capricorn Carbon Upper front bumper (for their ARC R10)? Capricorn USA has been out for months and hasn't answered their phones or returned emails... SO... I am going to order from Capricorn Italy, but shipping is high, so I'd like to get a few bumpers to even it out.

Cost is $22 ea, and I can ship one to anybody in the US for an even $30.

Let me know by 01/05 so I can place the order.

dragonracing

iTrader: (7)

Found some issues with my car. I had shimmed behind the hex pins to take up some of the slack and found that they were a bit tight and causing a lot of drag. Also, if you race carpet clean your belts. I have the low fric belts and they are supposed to be a redish brown and mine was black from rubber dibris. Cleaned a few other bearings and noticed the rear diff housing had some extra flashing i did not notice on the white plastic so i took care of that since it was making the bearing wobble pretty bad. Car now has no vibes and rolls smooth as silk like brand new.

Frank Root

iTrader: (25)

If you run spacers between the bearings in the spindles and hubs (1.9mm worth), then you can shim you axle spaced tight without causing any drag.

dragonracing

iTrader: (7)

Thank you frank. had not thought of that. I do remember a few older cars i had that did this. looks like ill be looking for some shims.

Ivan Dickson

iTrader: (32)

I decided to go with the ATS kit...

nene_805

iTrader: (4)

Has anyone tried the blitz tsx body on carpet? If so how did you like it. I like steering and was thinking about getting one.

dragonracing

iTrader: (7)

could you suggest a vendor to purchase these from? been kinda looking and cant seem to come up with a source.

blade072

iTrader: (98)

i know its probably too late but here in australia we have the black edition with ats included.....thinking of getting a spare... dont know if they ship worldwide but here is the link


http://eastcoasthobbies.com.au/index...roduct_id=1690

Frank Root

iTrader: (25)

I just used stuff I had in my bag...

Donny Banks

iTrader: (24)

I had a great race with the car today. TQ and win in stock The car was fast and consistent, found a great setup for the carbon chassis

inpuressa

iTrader: (10)

I think this is what you are looking for...

http://www.tqrcracing.com/shop/product_view.asp?p_id=2986