Difuser

iTrader: (2)

Joey that's about what mine looks like...I need to do electronics still. Other than that the chassis was a dream build. First outing will be this Saturday in the CanAm challenge. Bit of a grudge match with our friends from the land of eh!

The rear shaft from the 101 will work but spacing is off from the 104 due to the rear bulkheads being wider on the 101. The carbon wing brace does not work either because of the pod width. The entire 101 front suspension was a drop on affair.

The ability to change the wheelbase easily will be a plus. A little more trimming of the body is needed though.

5th wheel

Mike R
I am thinking of getting the alloy hubs for my b4.1#1386 ver 1
what will this part do for my buggy over the stock b4 hubs?
Thanks

5th wheel

And I also love my exotek F 104 f1r great chassis

idbdoug

iTrader: (41)

Will your new IFS suspension be UF1 legal?..
idbdoug

JoeyE

iTrader: (45)

Kinda finished. The only way I can fit the electronics under the body. Hope it works out.

MikeR

iTrader: (15)

Very nice!

Yes, that's the plan

An added tuning aid if you know how to tune with camber links angles and lengths. Brian Kinwald approved

JoeyE

iTrader: (45)

@MikeR
Hi Mike, what size screw do you use to mount a 25mm fan one the new rear motor pod?
Thanks~

MikeR

iTrader: (15)

Hi, m2.5 screws. fastener express .com

idbdoug

iTrader: (41)

Is your new IFS suspension an update of the current F104 adjustable front arm's or is it a totally new design???
As you can tell, I'm highly interested because i'm currently running your 2.5MM chassis on my F104v2 and i'm trying to decide between your F1R2 and CRC's new F1
Thanks
idbdoug

JoeyE

iTrader: (45)

Is there an IFS suspension coming out for the F104 chassis???

5th wheel

So it does no more than the stock part. Just some eye candy.

mingnon

iTrader: (12)

MikeR - pm sent re spares

JayL

We need more pics of built F1R2's!

also ideas for holding the battery in place

I'm thinking esc in rear, battery middle ,recv behind servo but I worry the battery is free to move front to rear with no tape

JoeyE

iTrader: (45)

I used a Tamiya aluminum servo post to hold the battery up front. I'll take a picture of that later and post it for you.

idbdoug

iTrader: (41)

Double sided duct tape. You can barely get battery out of the car, so use a small piece
idbdoug