fender_guy

iTrader: (7)

So the spool is good for stock racing? Anyone know where to get one, I have been looking but can't seem to find any in stock.

touringdriver

iTrader: (16)

our hobby store here in Lawrence KS. has 4 in stock. but that's a pretty good drive from florida.

fender_guy

iTrader: (7)

Haha I would say so... Do they have an online store?

mayhem3x

iTrader: (2)

The team associated part number is 1703. Solid axle/spool same thing. Tower has some and you could probaly find on ebay.

My big thing I was thinking about is with my tc4 with the one way in stock, it's said you have no front brakes but I never use my brakes the most is during a sharp turn throttle down to maybe half or quarter but never brake.

The benefit I can see is that you can hold more speed into a corner and have less off throttle time. But Mid to end corner is going to be about the same result. I run green springs in front and now i'm wondering if i do result with more speed in the corner I'm probally going to have to switch to a stiffer spring. Not a big deal though.

Tabushi

iTrader: (1)

Hi guys,

Im a 1/8th offroad and 1/18 onroad racer (stock m18) and im thinking on trying touring electric.

A friend is offering me a full package to enter to this onroad class (for 27t stock class) :

- TC4 Factory Team Chassis (almost new, just 2 weekends of usage).
- Cyclone Speed Control (Novak)
- No motor
- Hitec high speed servo
- Full set of tyres
- New body (painted)

All for US$ 150

What do you think about this ?, good start package ?, anything special i should know about the car ?

thanks in advance,

cya,

IL_AudiRacer

iTrader: (58)

Thats about what they go for but if hes your friend he should give you a little better deal. I picked up 2 Factory team TC4s with fresh painted vintage bodies and wheels with excellent servos + tons of parts for $225

Great car and pretty durable

fender_guy

iTrader: (7)

That sounds good!

Tabushi

iTrader: (1)

Yes, i just got it ... and my friend gave up for US$ 90 for the whole thing

Now im waiting my novak 13.5 brushless setup for stock racing ...

thanks,

yodace

iTrader: (8)

wondering if u guys good hlp. How do i get more rear traction, currently using Barry Baker ashalt set-up with take off 27.. I run on ashalt that is sprayed with pop...

salteen

iTrader: (89)

Anybody have part number ASC31092?? The FT left side Camber Link Spacers ....I'm in desperate need of 2 of them.

ILDRVR

I am begining to get my tc4 ready again for indoor carpet racing. I will be running Jaco greens on ozite with my novak 13.5. My tc is pretty much a rtr with good electronics and some outdrives.

I would like to know of any 13.5 rubber carpet setups and tricks that have been working. I would like to start the season with a new set-up to see how it works. Last winter it seemed like I lost alot of speed in the tight corners.

Thank you

ILDRVR

I forgot to mention that I will be running lipo
Thanks

hippie

iTrader: (20)

I have a FTTC4 & i tried this setup & like it so far .


http://rc10.com/racerhub/setup/racer...ekend_2005.pdf

ILDRVR

Thanks for the setup, but does anyone have a good rubber carpet setup for the rtr?

LILROBBY

go to the associated website and try some of there setups they have a variety of them for different surfaces.