Serpent S411
#1127
Tech Elite
iTrader: (19)
Green is 2.6/14.8
Grey 2.9/16.5
black 3.5/19.9
so for springs available now
White 2.3/13
Green 2.6/14.8
Yellow 2.8/16
Grey 2.9/16.5
Orange 3.4/19.5
Black 3.5/19.9
Red 4.1/23.5
so the new springs are a slight step (closer) rating to the kit springs.
#1131
Couple questions...
1)Can someone compare the S411 Hard arms vs. a Tamiya 416/417 arm stiffness?
2)Has anyone tried the S411 Delrin Driveshaft Adaptors, what's the wear like?
Thanks
1)Can someone compare the S411 Hard arms vs. a Tamiya 416/417 arm stiffness?
2)Has anyone tried the S411 Delrin Driveshaft Adaptors, what's the wear like?
Thanks
#1132
Hey guys, just wanted to put this here too since some of the S400 parts carry over to the S411.
With the S411 coming out this might be bad timing, but I just gained access to quite a few Serpent parts, including S400 parts that need to be liquidated from a former supplier. I kind of wanted to just gauge interest here, I'm going to go through and create a working PDF or excel sheet with parts, amount in stock, etc. If anyone was interested or looking for S400 parts, send me a PM and let me know what you are looking for (part numbers please) and I'll get back to you. Bulk orders would be preferable, and if any hobby shops or sellers were interested I'd be happy to get in touch. PM me here or send an email to [email protected], and let me know!
Also if you guys think you might know anyone else interested, let them know or have them email me.
Also if you guys think you might know anyone else interested, let them know or have them email me.
Last edited by Rocky8333; 09-12-2011 at 03:00 PM.
#1133
Tech Initiate
#1135
Tech Adept
That'ss Marc Fischers car on Megadrom Geilenkirchen's, training for the german nationals this weekend.
#1138
Tech Apprentice
all the details are on the serpent site.
Green is 2.6/14.8
Grey 2.9/16.5
black 3.5/19.9
so for springs available now
White 2.3/13
Green 2.6/14.8
Yellow 2.8/16
Grey 2.9/16.5
Orange 3.4/19.5
Black 3.5/19.9
Red 4.1/23.5
so the new springs are a slight step (closer) rating to the kit springs.
Green is 2.6/14.8
Grey 2.9/16.5
black 3.5/19.9
so for springs available now
White 2.3/13
Green 2.6/14.8
Yellow 2.8/16
Grey 2.9/16.5
Orange 3.4/19.5
Black 3.5/19.9
Red 4.1/23.5
so the new springs are a slight step (closer) rating to the kit springs.
I've made this sheet. Includes gearing and springs from Serpent, HPI and Tamiya. Color, rate and turns. It's in German. If you like, I can also make and upload one in English. It's made in XL and converted to PDF. It's easy to change gearing rates (spur and pinion). I've laminated the sheet, and it is on my desk every time I am driving the S411.
Regards
Bjarne
#1139
Tech Elite
iTrader: (19)
Hi.
I've made this sheet. Includes gearing and springs from Serpent, HPI and Tamiya. Color, rate and turns. It's in German. If you like, I can also make and upload one in English. It's made in XL and converted to PDF. It's easy to change gearing rates (spur and pinion). I've laminated the sheet, and it is on my desk every time I am driving the S411.
Regards
Bjarne
I've made this sheet. Includes gearing and springs from Serpent, HPI and Tamiya. Color, rate and turns. It's in German. If you like, I can also make and upload one in English. It's made in XL and converted to PDF. It's easy to change gearing rates (spur and pinion). I've laminated the sheet, and it is on my desk every time I am driving the S411.
Regards
Bjarne