confused novak
09-10-2010, 02:58 AM
#1
confused novak
Hi all still cant work out whats going on with my novak setup.
novak kinetic 2s and novak ballistic 4.5t 550 motor.
I finally got power to my esc again after leaving it unplugged overnight.
when i turn my esc on all the lights come on go through there sequence
and show no errors. i pull the throttle and the motor runs for about 3seconds
then stops and all the lights go out and esc will not switch back on.
i have to diconnect the battery wait 1-2 hours hook it back up and esc works again pull the throttle and it does it all over again what am i doing wrong i have tried sevaral battery packs and recievers makes no difference
my sevo is new ace 1015 please help thanx.
__________________
novak kinetic 2s and novak ballistic 4.5t 550 motor.
I finally got power to my esc again after leaving it unplugged overnight.
when i turn my esc on all the lights come on go through there sequence
and show no errors. i pull the throttle and the motor runs for about 3seconds
then stops and all the lights go out and esc will not switch back on.
i have to diconnect the battery wait 1-2 hours hook it back up and esc works again pull the throttle and it does it all over again what am i doing wrong i have tried sevaral battery packs and recievers makes no difference
my sevo is new ace 1015 please help thanx.
__________________
09-10-2010, 05:52 AM
#2
Tech Regular
Hi, don't know the answer to your query but you may want to ask it in the Kinetic thread;
http://www.rctech.net/forum/electric...inetic-54.html
There are a number of Novak people on there.
http://www.rctech.net/forum/electric...inetic-54.html
There are a number of Novak people on there.
09-10-2010, 07:15 AM
#3
Hi all still cant work out whats going on with my novak setup.
novak kinetic 2s and novak ballistic 4.5t 550 motor.
I finally got power to my esc again after leaving it unplugged overnight.
when i turn my esc on all the lights come on go through there sequence
and show no errors. i pull the throttle and the motor runs for about 3seconds
then stops and all the lights go out and esc will not switch back on.
i have to diconnect the battery wait 1-2 hours hook it back up and esc works again pull the throttle and it does it all over again what am i doing wrong i have tried sevaral battery packs and recievers makes no difference
my sevo is new ace 1015 please help thanx.
__________________
novak kinetic 2s and novak ballistic 4.5t 550 motor.
I finally got power to my esc again after leaving it unplugged overnight.
when i turn my esc on all the lights come on go through there sequence
and show no errors. i pull the throttle and the motor runs for about 3seconds
then stops and all the lights go out and esc will not switch back on.
i have to diconnect the battery wait 1-2 hours hook it back up and esc works again pull the throttle and it does it all over again what am i doing wrong i have tried sevaral battery packs and recievers makes no difference
my sevo is new ace 1015 please help thanx.
__________________
Novak Instruction Downloads
Trouble-shooting TeamNovak's One Touch™ Speed Controls
Please make your initial email as detailed as possible. Include:
~ speed control (brand/model)
~ motor (brand/wind)
~ number/type of cells
~ battery, brand (c rating/capacity
~ rotor (old/new)
~ connectors used
~ servo (brand/model)
~ radio system (receiver/transmitter)
~ vehicle & gearing
~ warranty claim?
~ lipo cut-off, on/off
~ any external modules (BEC/brand, Glitch Buster)
~ other important info: water damage, corrosive chemical sprays, excess heat, etc
~ speed control (brand/model)
~ motor (brand/wind)
~ number/type of cells
~ battery, brand (c rating/capacity
~ rotor (old/new)
~ connectors used
~ servo (brand/model)
~ radio system (receiver/transmitter)
~ vehicle & gearing
~ warranty claim?
~ lipo cut-off, on/off
~ any external modules (BEC/brand, Glitch Buster)
~ other important info: water damage, corrosive chemical sprays, excess heat, etc
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
