Schumacher Corner
Tech Champion
iTrader: (32)
Join Date: Aug 2001
Location: In a land of mini-mighty mental giants
Posts: 8,854
Trader Rating: 32 (100%+)
HAHAHA....I was in Ohio for the Grand Finale at The Gate....I was seeing just how bad I could blow out and how far I could flip my car off the track. I think I got to about level 9.5 on both of them.... Last time at the Track my car was really good TQed just got peeled in the main which seems to be a theme at the track lately. The TA Nationals will be awesome I know how well my car works so we will see if I keep the blowouts in Ohio with Seaball and do something. See you saturday....or Friday if you are going to get out there then.
Tech Champion
iTrader: (17)
HAHAHA....I was in Ohio for the Grand Finale at The Gate....I was seeing just how bad I could blow out and how far I could flip my car off the track. I think I got to about level 9.5 on both of them.... Last time at the Track my car was really good TQed just got peeled in the main which seems to be a theme at the track lately. The TA Nationals will be awesome I know how well my car works so we will see if I keep the blowouts in Ohio with Seaball and do something. See you saturday....or Friday if you are going to get out there then.
Tech Master
iTrader: (5)
havnt got a chance, waiting on my new charger new speedie new battery and new motor from schumacher usa
its only a 5.5 but at my skill level itll be way to much any way. i plan to race next weekend though if the gear arrives friday ill put it down for a lap just to get a feel.
i might give them a call it depends if i go to tamworth, its cold there lol, ill look the part till the first corner atleast
u going to tamworth?
cheers, Josh P
Tech Master
iTrader: (80)
What is the height from the top of the chassis to the bottom of the top deck in the Mi3?
I think that I am picking one up to replace my TC5 and need to get measurements to make sure that my lipos fit ok.
Also, what is the part number for the battery hold on system?
Chirag
I think that I am picking one up to replace my TC5 and need to get measurements to make sure that my lipos fit ok.
Also, what is the part number for the battery hold on system?
Chirag
Tech Fanatic
iTrader: (1)
Guys..I have been running the Cris Ashton Test Day setup on tarmac rubber(sorex 36)using brushless stock for a while now ..with good results(top 3 in A mains)..I am entered in an event (Brushless stock)using foam on Tarmac...any suggestions as to changes I might need to do for a base setup before I arrive
Thanks Bob
Thanks Bob
Tech Initiate
Josh:
nah mate,
I was actually down in brissy on the easter weekend for a holiday and i was all packed up ready to go racin until we got an email sayin no racing on easter sunday
btw, I have already improve alot on the setup that I posted haha, keeps getting faster every weekend! I now do the same lap times as the Jovanovics and Simon Nicholson
Although the set-up only works with a 5cell (forward) chassis, not sure about lipo, unless you put all the weight at the front. I might post it sometime this week.
nah mate,
I was actually down in brissy on the easter weekend for a holiday and i was all packed up ready to go racin until we got an email sayin no racing on easter sunday
btw, I have already improve alot on the setup that I posted haha, keeps getting faster every weekend! I now do the same lap times as the Jovanovics and Simon Nicholson
Although the set-up only works with a 5cell (forward) chassis, not sure about lipo, unless you put all the weight at the front. I might post it sometime this week.
R/C Tech Elite Member
iTrader: (37)
R/C Tech Elite Member
iTrader: (37)
If you need to ask, you need a Core 5000....
Sorry I couldn't help myself
You actually have 25mm from the chassis to the bottom of the bulkhead so most LiPo's will fit without issue.
My little battery strap LiPo trick uses Part U3222, shims and a bit of ingenuity
Sorry I couldn't help myself
You actually have 25mm from the chassis to the bottom of the bulkhead so most LiPo's will fit without issue.
My little battery strap LiPo trick uses Part U3222, shims and a bit of ingenuity
What is the height from the top of the chassis to the bottom of the top deck in the Mi3?
I think that I am picking one up to replace my TC5 and need to get measurements to make sure that my lipos fit ok.
Also, what is the part number for the battery hold on system?
Chirag
I think that I am picking one up to replace my TC5 and need to get measurements to make sure that my lipos fit ok.
Also, what is the part number for the battery hold on system?
Chirag
Tech Champion
iTrader: (17)
Guys..I have been running the Cris Ashton Test Day setup on tarmac rubber(sorex 36)using brushless stock for a while now ..with good results(top 3 in A mains)..I am entered in an event (Brushless stock)using foam on Tarmac...any suggestions as to changes I might need to do for a base setup before I arrive
Thanks Bob
Thanks Bob
Tech Champion
iTrader: (32)
Join Date: Aug 2001
Location: In a land of mini-mighty mental giants
Posts: 8,854
Trader Rating: 32 (100%+)
Guys..I have been running the Cris Ashton Test Day setup on tarmac rubber(sorex 36)using brushless stock for a while now ..with good results(top 3 in A mains)..I am entered in an event (Brushless stock)using foam on Tarmac...any suggestions as to changes I might need to do for a base setup before I arrive
Thanks Bob
Thanks Bob
Tech Master
iTrader: (80)
Where can I find the U3222 battery strap in the US? I only see U2985 on the Mi3 parts page (Chassis Parts) on the Schumacher USA web page.
Any help would be appreciated. May have to make my own...
Chirag
Tech Master
iTrader: (16)
Who's hittin up the Reedy this year? Open mod son
Tech Fanatic
iTrader: (1)
Thanks guys
Tech Master
iTrader: (19)
Chirag, just search for u3222 on the U.S. page, there's a search box on the bottom left.
Tech Fanatic
iTrader: (14)