LRP SXX StockSpec ESC
#976
#977
Tech Initiate
ok thank you,
A question add, the engine does not warm up you excessively in quando you happen from the program I number three of advance?
I take this configuration 0-3-3-0 with the sxx/ss and one x12 10.5 and extract the engine on approximately 90 degrees.
And the tekin more go than sxx/ss and warm up less
A question add, the engine does not warm up you excessively in quando you happen from the program I number three of advance?
I take this configuration 0-3-3-0 with the sxx/ss and one x12 10.5 and extract the engine on approximately 90 degrees.
And the tekin more go than sxx/ss and warm up less
#978
Max motor with SXX Stock Spec and lipo 1S
Hello,
What is the biggest motor a SXX Stock Spec can support with lipo 1S?
Thanks
What is the biggest motor a SXX Stock Spec can support with lipo 1S?
Thanks
#979
Tech Adept
sxx ss with x11 13.5T
hi guys,
any of tried the sxx ss mk3 with a x11 13.5T motor (TC; 2s lipo 50C is used)?? i am still looking to find the sweet spot for this motor as i have to use it in our racing series. the track is rather open with a 80m straight and some long and fast corners. only small technical infield. any suggestions to FDR on the x11??
any of tried the sxx ss mk3 with a x11 13.5T motor (TC; 2s lipo 50C is used)?? i am still looking to find the sweet spot for this motor as i have to use it in our racing series. the track is rather open with a 80m straight and some long and fast corners. only small technical infield. any suggestions to FDR on the x11??
#981
Tech Champion
iTrader: (1)
On top of that I have seen the abuse of BADMAN, who continues to chuck way more power at his 12th than anyone can handle in the spirit of a massive grin! He has run some serious settings on his SXX SS with no problems at all (short of dumping in under 6 mins). I say it would be very very hard to kill the ESC.
#982
Anyone seen any software downloads, or interface information on the V2 yet??
#983
hello ...
hy all just stopping buy anyone of you using a 9.5 lrp motor and a lrp sxx ss ?
just needed help with the gear ratio on what is good to used iv tried many gearing ratio but still cannot find any good ones ... im using xray t2 with a fdr x1.7 could anyone mind shareing their gear ratio that can hold the sxx ss .. thanks .
just needed help with the gear ratio on what is good to used iv tried many gearing ratio but still cannot find any good ones ... im using xray t2 with a fdr x1.7 could anyone mind shareing their gear ratio that can hold the sxx ss .. thanks .
#984
Is there a new version of the SXX stock spec coming out? Most model shops have the V3 on offer at the moment. I'm waiting for LRP to replace my speedo, just wondering if they will replace it for the new one.
#986
Regards
#987
Keep going back to the SXX SS
Hi all..
After much time chatting to ALL the Tekin gods...
Tried ALL the latest settings recommended by Tekin gurus..
The SXX SS leaves the tekin..smooth power, cant kill it (typical lrp), and it has the BEST brakes all round....
The tekin is fast,,but like riding a bucking horse, and no high speed brakes..
Didnt change anything, just the esc,,put in settings I know work.
3, 3 ,9, 0...and no problems came from 7 to 3rd..
Motor 55deg c....10.5 fdr 6.9...duo 1 "0" timming..Large out door gas track
Seem's the "0" timed motors are the go with these timed speedies....
Love it....
Mike
After much time chatting to ALL the Tekin gods...
Tried ALL the latest settings recommended by Tekin gurus..
The SXX SS leaves the tekin..smooth power, cant kill it (typical lrp), and it has the BEST brakes all round....
The tekin is fast,,but like riding a bucking horse, and no high speed brakes..
Didnt change anything, just the esc,,put in settings I know work.
3, 3 ,9, 0...and no problems came from 7 to 3rd..
Motor 55deg c....10.5 fdr 6.9...duo 1 "0" timming..Large out door gas track
Seem's the "0" timed motors are the go with these timed speedies....
Love it....
Mike
#989
Version 2 is only SXX and SXX TC not SXX Stock Spec. But i think will be possible update the SXX SS like the version 2 trough the sensor port. At the LRP master people had the update from MKI/II to III in that way. And for what i know the MKIII is the last release.
Regards
Regards
#990
...
Version 2 is only SXX and SXX TC not SXX Stock Spec. But i think will be possible update the SXX SS like the version 2 trough the sensor port. At the LRP master people had the update from MKI/II to III in that way. And for what i know the MKIII is the last release.
Regards
Regards