k_bojar

iTrader: (30)

aftermarket spurs will not fit without the spur gear spacer - http://www3.towerhobbies.com/cgi-bin...?&I=LXZEU7&P=Z - but once you get one of these, anyone's spurs can be used

the stock gears are metric 48p gears..

PDR

iTrader: (31)

The F104 Pro uses the 04 Tamiya spurs (0.4mm pitch), which are quite usable with 64p pinions. Some of the other kits use the 06 spurs (0.6mm pitch), which can only be used with Tamiya pinions (or equivalent 06 ones).

Luosi

I've got the standard car, and I want to upgrade everything at the front end(turnbuckles, servo bits etc.) to pro spec. What are all the parts i need?

Dan

iTrader: (75)

Thanks, what gearing would you recommend with "standard" 48P gears? Reason being is I have a bunch of 48P pinions and don't really want to invest in more Tamiya pinions.

jlask

hello team! i've just purchased f104 x1 kit (thanks alot rtypec!!) and i have a couple of questions for you guys..

-Is there any pinion in the kit or only spurs?
-Can i purchase pinions 48 pitch from other brands or only tamiya fit?
-Does the carbon lower deck f104 pro fits to f104 x1?

Please let me know because i want to order these also. can't wait to build it and go to the track...

Thanks in advance,

yannis


-- new to f1

Dan

iTrader: (75)

Oh yeah, I'm curious if the X1 comes with a pinion too.

hansenhon

iTrader: (6)

a 25T pinion... along with f104 standard spur gear (104T & 93T)

mattwoodcraft

iTrader: (10)

looks like Tamiya care after all

jlask

good to know about the pinion gear!

Bigtomo71

Prob boring you with all my stupid posts now but here goes!
Is there any difference between the Ferrari F60 an the McLaren MP4/24? Does any 1 know of any new releases cumin out???
Thanks

InspGadgt

Other than one is a Ferrari body/wings and the other is a McLaren body/wings...no they are the same.

ghoppa

iTrader: (63)

anybody knows where I can buy a steel rear shaft before the weekend??? I snapped mine last club race and I've been looking everywhere with no luck???

can anybody help???

gsxr0311

iTrader: (19)

McLaren currently has more points and has better drivers so i would go with them

gsxr0311

iTrader: (19)

did u try tamiyausa ?

oldnwise

iTrader: (6)

You will not get it by the weekend but RcMart have them in stock as do some of the HK based ebay shops.
http://www.rcmart.com/catalog/rc-f10...4-p-32658.html

Other option is to purchase part 3485036 which is the longer shaft used for the F103/F103GT. The flat cut outs for the 3mm grub screws are in the same positions on this part as the F104 shaft. You will need to cut around 16mm off the diff side end of the shaft with a hack saw to bring back to the length of the F104 shaft. Found a US store with stock.
https://www.tqrcracing.com/shop/prod....asp?p_id=1128