Ghost-Rider

damm thats a sweet ride dude
how fast does it go ?

wyd

iTrader: (51)

Well I hope it goes fast!!!!!!! Dave paints some killer stuff. Wish he lived alot closer.

rtypec

iTrader: (2)

Wasabi Martin. Like Dan said, David was running the Easy Button 3.0 OG version. The one before the carpet version came out. This weekend, he was testing motors and bodies I think. I was trying his setup on my car and didn't have a good day. Wrecked pretty badly on the second run and spent the rest of the day sorting out the bent/broken stuff. It rained last week and they only sprayed a gallon of syrup so traction wasn't that high.

MDawson

iTrader: (27)

Zilla-

So are we going to run offroad next weekend?

rtypec

iTrader: (2)

It's odd that they said that the Tamiya Track is closed, but the dirt track behind it and the pits may be open so I'll show up to see if it's true. I plan on working with my TNX for the upcoming Proline race. Got some cool plugs and some 60% nitro to try out(is that like having a 6 turn?) j/k it's 30%. The guys mentioned something about doing some offroad or rally in the dirt but that track's dirt is some dirty dirt and I don't plan on getting my stuff too dirty, ya dig? Don't you have a TNX too?

MDawson

iTrader: (27)

Ill check with Steve if I can hijack his

Jack2

iTrader: (1)

thats ok, sorry about the poor spelling

Martin Crisp

Hey Guys,

Thanks for the response. By the way, what is an "easy button 3.0". I have never heard of this body before. Do you know of a website with pics?

Also, I don't have the new rear suspension components, how do you like them?

Martin

Korey Harbke

iTrader: (13)

It's the protoform Stratus 3.0 AP. shoul dbe on prolines website.

RBCHOCO

DOES ANYONE HAVE EXTRA 415 STICKERS THAT I CAN BUY OR GET?

Hebiki

iTrader: (26)

mdawson: YGPM

Jack2

iTrader: (1)

www.speedtechrc.com . look in TRF hop up parts, $2.99 it's the same sticker sheet which comes with the kit.

~Jack

trf racer

does any1 know were i can get the ms 2.5mm chassis from

TryHard

iTrader: (4)

hey trf racer,

are you looking for a 2.5mm replacement chassis? or a new one as a tuning option?

Fibre-Lyte make a 2.5mm one for the std car, and a 2mm one for the MS (there are a few differences between the std car and MS on chassis).

If your after a replacement 2.5mm for the MS, I'm pretty sure Fibre-lyte would make one up for you, just bung them an email.

Baring that, try all the usual places (Speedtech, Rainbow10), even if they don't have one in stock, they can probably get hold of one pretty sharpish.

HiH
Ed

trf racer

its a stnd 415 but wiv the lw suspension and the worlds blocks,now i need a 2.5 mm chassis,what is the difference bt the ms chasis and the stndard 415 chassis.y cnt u use one on the other,