Ko BMC Speedo
#706
Tech Fanatic
Jason... check out the videos when they get posted at www.therczone.com
im 8th on the grid... finished 2nd in A2 and A3 (even with the car loose).
My car...
i bet you miss racing here in cali huh?
im 8th on the grid... finished 2nd in A2 and A3 (even with the car loose).
My car...
i bet you miss racing here in cali huh?
#707
Hey guy's , Just got my KO-1.5 esc with all the trimings any advise as for starting pointers for tourer/rubber, 10.5 on a large track. Roll out # would be nice,all advise welcome ,need bulk power
Thanks in advance.
Thanks in advance.
#709
Tech Elite
iTrader: (24)
#715
Tech Elite
iTrader: (29)
My car was coming off at 45-50 degrees C. Air temp was around 20 degees C. This was with an Lrp 10.5. With a lrp heatsink and fan on the motor.
Antoni
#716
i was watching the iic today,
Drew Ellis,
what is your 13.5 rubber profile like....i would like to use it for my setup
thanks
Matt
Drew Ellis,
what is your 13.5 rubber profile like....i would like to use it for my setup
thanks
Matt
#717
#719
This was probably one of the least used speed controls at the IIC, but it preformed flawlessly and had as much as anything out there.
#720
Tech Elite
iTrader: (51)
Join Date: Feb 2002
Location: Comin at ya from a distant galaxy
Posts: 2,930
Trader Rating: 51 (100%+)
Hey Guy's
Question, Im new to this speedcontroller. How are you getting up to 6 on the timing on the timing I can only move mine to 2 ? Im using ver 1.52 stock manager program.
Question, Im new to this speedcontroller. How are you getting up to 6 on the timing on the timing I can only move mine to 2 ? Im using ver 1.52 stock manager program.