Skitee

Hey guys I just picked up a good clean used BMC V1, does anybody have a really strong profile to use with a 7.5 LRP X-12 ?

bl4

iTrader: (5)

Hi can the Team Orion Vortex ESC Digital Setting Box ORI65020 be use on Team orion ESC ORI65006 and Ko ESC thks?

Dane

iTrader: (26)

Before you do anything, I'd send it in for the 1.5 upgrade. Gets rid of the cogging and adds some features.

Robert @ KO is the man to talk to.

Skitee

Ok I have pm'd Robert let's see what he can do for me.

How about those mod profiles, anybody willing to share them ?

Tha Skinny

iTrader: (8)

Has anyone run a sp3.0 17.5 with the BMC

Broady Racing

iTrader: (7)

Hi all , We have a problem with our v1.5. Just installed it back into our touring car and it wont run unless you give it a push. We have tried different sensor cables etc and checked all we could think off - anyone had this problem ? Thanks

Tha Skinny

iTrader: (8)

What were you running it in before?

Broady Racing

iTrader: (7)

It was running f1 with a 17.5 before, but we have tried different motors and profiles, all with same result

Tha Skinny

iTrader: (8)

interesting.....

Foodie

How long does it take to get the esc upgraded to 1.5?

buffalobill989

iTrader: (50)

i think it depends on how busy they are. but i had pulled mine sent it in and it back within a week or so. robert & ko's customer service are excellent. never had any issues with them.

Skitee

Could you please post the details of where to send the BMC for the 1.5 upgrade.

buffalobill989

iTrader: (50)

you need to contact robert @ [email protected]

goto kopropousa.com and goto the repair link at the top. theres a repair form to fill out. put it in the box. mail it to ko propo usa and whalla. im not real sure how payment happens. i sent a money order with mine. i think it was 25. hope this helps

Tha Skinny

iTrader: (8)

Johnny Wishbone

iTrader: (6)

Running Goops profile and 3.8 fdr, timing cranked on the motor, 1 fan on motor, SC timing at 4. Play with the avg bar to fit the torque band.