Awesomatix EP Touring Car (A700 Shaft Drive)
#6661
Tech Adept
Are you sure 96/43 will fit?
So now an other question comes up what is the largest pinion with 96t Spur that still fit's with enough play between both spur and pinion?
Claude
#6663
Tech Elite
iTrader: (5)
For 17.5 and 13.5 use a 82 64p
for Mod us 96 64p
If your running a 10.5 to 8.5 with little or no timing from the ESC I would use something around 88-90.
#6664
Tech Adept
You don't need a spear gear with just 2 holes. I've used Kimbrough, CRC, Xenon, Xray for both stock classes and Mod. With CRC you do have to be careful the width of the gear is a bit wide and may rub on the motor bulk head so you have to sand one edge to make it clear.
For 17.5 and 13.5 use a 82 64p
for Mod us 96 64p
If your running a 10.5 to 8.5 with little or no timing from the ESC I would use something around 88-90.
For 17.5 and 13.5 use a 82 64p
for Mod us 96 64p
If your running a 10.5 to 8.5 with little or no timing from the ESC I would use something around 88-90.
#6668
Tech Adept
Big Thank's to all of You for all the Info's.
Will go for the ARC spur.
Claude
Will go for the ARC spur.
Claude
#6669
I still got some left.. Brand new in a packaging Awesomatix parts on ebay
#6670
Hi!
Another new proud A700L owner!
I am a little curious is screwing the ballstud from under AM18-1 can achieve the same link/roll center setting than AM19 without any shim? Probably not very practical or the ballcup may also hit something
I thought of that after ordering some AM19 to try an outdoor setup.
I know it was already talk about but just to be certain on the top deck screws setting a white dot mean something screwed without any ST09 and a red dot no screw or something with a ST09 under?
Thanks!
Alexandre
Another new proud A700L owner!
I am a little curious is screwing the ballstud from under AM18-1 can achieve the same link/roll center setting than AM19 without any shim? Probably not very practical or the ballcup may also hit something
I thought of that after ordering some AM19 to try an outdoor setup.
I know it was already talk about but just to be certain on the top deck screws setting a white dot mean something screwed without any ST09 and a red dot no screw or something with a ST09 under?
Thanks!
Alexandre
#6671
Sorry double post
Last edited by daktulos; 07-03-2014 at 05:48 AM. Reason: Double post
#6672
R/C Tech Elite Member
iTrader: (28)
Hi!
Another new proud A700L owner!
I am a little curious is screwing the ballstud from under AM18-1 can achieve the same link/roll center setting than AM19 without any shim? Probably not very practical or the ballcup may also hit something
I thought of that after ordering some AM19 to try an outdoor setup.
I know it was already talk about but just to be certain on the top deck screws setting a white dot mean something screwed without any ST09 and a red dot no screw or something with a ST09 under?
Thanks!
Alexandre
Another new proud A700L owner!
I am a little curious is screwing the ballstud from under AM18-1 can achieve the same link/roll center setting than AM19 without any shim? Probably not very practical or the ballcup may also hit something
I thought of that after ordering some AM19 to try an outdoor setup.
I know it was already talk about but just to be certain on the top deck screws setting a white dot mean something screwed without any ST09 and a red dot no screw or something with a ST09 under?
Thanks!
Alexandre
not sure where you are talking about the ball stud on the am18-1. the am18-1 will have a longer link than the AM19. am18-1 should be same length as FFG top mounts.
for the top deck -- red dot means st09 collar installed. more info about that here--
http://www.petitrc.com/reglages/awes...matixA700.html
#6673
OK thanks it's clearer now!
I don't want to look like a guy that's arguing so I will try to borrow an Am18-1 from a friend when I will receive the Am19 to take measurements and show what I mean if it's an interesting alternative for cheap guys like myself.
Sometimes even in French I have difficulty to make my friends understand me!
Cheers
Alexandre
I don't want to look like a guy that's arguing so I will try to borrow an Am18-1 from a friend when I will receive the Am19 to take measurements and show what I mean if it's an interesting alternative for cheap guys like myself.
Sometimes even in French I have difficulty to make my friends understand me!
Cheers
Alexandre
#6674
Tech Rookie
Is Leespeed Spur any good? Anyone have tried them with SD1 or SD2?
#6675
.
Last edited by G-rem; 07-04-2014 at 05:23 AM.