1/10 R/C F1's...Pics, Discussions, Whatever...
#3676
Tech Champion
Rather surprised the 2 foam tire'd cars didn't dominate
What rubber tires were the F104W's using? I'd really like to run my '79 Lotus but the stock tires just aren't going to cut it.
What rubber tires were the F104W's using? I'd really like to run my '79 Lotus but the stock tires just aren't going to cut it.
#3678
Tech Elite
iTrader: (24)
Just a heads up, I just got a shipment of McLaren bodies in, MP4/5's 6's and MP4/24's
Will adjust the inventories on the store momentarily, also the missing decals for the reissues will be available for purchase by the end of this week!!!!
Mercedes decals will be on the store by Tuesday
Will adjust the inventories on the store momentarily, also the missing decals for the reissues will be available for purchase by the end of this week!!!!
Mercedes decals will be on the store by Tuesday
#3679
#3683
Hi guys, had our first F1 race for 2012. Here are the highlights. Hope you like it, especially the ending.
Click here for full f1 rc race report.
Winner was rubber tire F104. Second F103LM with rubber. Third a Cross CF01 with foams. Gearing limited to 25T pinion, silvercans. Tight racing in all three 15 minutes mains.
+ YouTube Video | |
Click here for full f1 rc race report.
Winner was rubber tire F104. Second F103LM with rubber. Third a Cross CF01 with foams. Gearing limited to 25T pinion, silvercans. Tight racing in all three 15 minutes mains.
#3685
Track was loose and dusty. It was good towards the evening, but videos by then would be too dark.
#3687
Hi Roy,
Tamiya rubber tires (though rules are any brand). Foams also Tamiya. Yes we were using tire additives.
It's really the track, it's a warehouse so dusty. Only after being run in by touring cars does it get decent grip. Here is the breakdown.
Two of the cars on track were runner ups in the Tamiya Asia Cup Finals (8 countries participate). The winner ran the 2010 runner up car. Me the organizer was 2011 runner up. The 2010 TAC F1 champion was the one who layed down in the track to take the ground level videos.
Best of all, we had 5 newcomer racers to F1. More than the oldtimers.
Joel
Tamiya rubber tires (though rules are any brand). Foams also Tamiya. Yes we were using tire additives.
It's really the track, it's a warehouse so dusty. Only after being run in by touring cars does it get decent grip. Here is the breakdown.
Two of the cars on track were runner ups in the Tamiya Asia Cup Finals (8 countries participate). The winner ran the 2010 runner up car. Me the organizer was 2011 runner up. The 2010 TAC F1 champion was the one who layed down in the track to take the ground level videos.
Best of all, we had 5 newcomer racers to F1. More than the oldtimers.
Joel
#3688
Tech Regular
iTrader: (3)
The light blue one on the left is running r1 softs and f3 softs. Of the rubber tire cars he pulled off the fastest lap. That corrally naturally was flying. Even with a 25.5 and throttle EPA turned down he was still at least half a second faster per lap then our 21.5 rubber cars.
#3689
Tech Regular
iTrader: (3)
The light blue one on the left is running r1 softs and f3 softs. Of the rubber tire cars he pulled off the fastest lap. That corrally naturally was flying. Even with a 25.5 and throttle EPA turned down he was still at least half a second faster per lap then our 21.5 rubber cars.
#3690
Tech Master
iTrader: (2)
The light blue one on the left is running r1 softs and f3 softs. Of the rubber tire cars he pulled off the fastest lap. That corrally naturally was flying. Even with a 25.5 and throttle EPA turned down he was still at least half a second faster per lap then our 21.5 rubber cars.