U.S. Vintage Trans-Am Racing
#5807
Tech Champion
iTrader: (2)
I thought the way he'd gone at it was to make a pan car that mounted TC suspension components, that's how he got the HPI Vintage tires and wheels to mount up. I don't believe I've seen any sort of "adapter" for fitting the TC wheels to pan car hubs (rear) and axles (front).
On those adapters I would just send him an email and ask for the adapters. He might have a set he can sell, or if his machine lathe is up he might be able to cut you some.
Edit: Uh ok my memory is fading. I did think that he had just an adapter for the front, but it looks like he changed the whole steering hub and axle. You can see that its just pan car arms up front too.
Last edited by snoopyrc; 08-25-2009 at 02:55 PM.
#5809
USVTA site down?
Is the USVTA site down for updates? Getting a GoDaddy domain name parked message when following this link:
http://www.usvintagetransam.com/
Thanks!
Daddy-o
http://www.usvintagetransam.com/
Thanks!
Daddy-o
#5816
Tech Addict
iTrader: (22)
ok.....so say i get a cyclone-s chassis
i get the HPI 1966 mustang body
the 4793 and 4797 tires
and the 3815 and 3822 wheels...
what else would i need to get a legal car to run?
and motor/esc? 21.5 i know...since i want to run lipo, but what brand/spec?
i JUST found out about this class from a buddy...and it looks like it'd be fun.
i've already got an m11 and a few spare rx's that i could use, an extra transponder (if needed), and 2 2s 25c 5000mah comon sense lipos i can run.
i get the HPI 1966 mustang body
the 4793 and 4797 tires
and the 3815 and 3822 wheels...
what else would i need to get a legal car to run?
and motor/esc? 21.5 i know...since i want to run lipo, but what brand/spec?
i JUST found out about this class from a buddy...and it looks like it'd be fun.
i've already got an m11 and a few spare rx's that i could use, an extra transponder (if needed), and 2 2s 25c 5000mah comon sense lipos i can run.
#5817
Tech Champion
iTrader: (17)
ok.....so say i get a cyclone-s chassis
i get the HPI 1966 mustang body
the 4793 and 4797 tires
and the 3815 and 3822 wheels...
what else would i need to get a legal car to run?
and motor/esc? 21.5 i know...since i want to run lipo, but what brand/spec?
i JUST found out about this class from a buddy...and it looks like it'd be fun.
i've already got an m11 and a few spare rx's that i could use, an extra transponder (if needed), and 2 2s 25c 5000mah comon sense lipos i can run.
i get the HPI 1966 mustang body
the 4793 and 4797 tires
and the 3815 and 3822 wheels...
what else would i need to get a legal car to run?
and motor/esc? 21.5 i know...since i want to run lipo, but what brand/spec?
i JUST found out about this class from a buddy...and it looks like it'd be fun.
i've already got an m11 and a few spare rx's that i could use, an extra transponder (if needed), and 2 2s 25c 5000mah comon sense lipos i can run.
#5818
Tech Addict
iTrader: (22)
http://www3.towerhobbies.com/cgi-bin...?&I=LXWLX1&P=7
would that be a good combo to run?
and, is the cyclone-s a good chassis to start with? i've never done anything on-road
would that be a good combo to run?
and, is the cyclone-s a good chassis to start with? i've never done anything on-road
#5819
Tech Champion
iTrader: (17)
http://www3.towerhobbies.com/cgi-bin...?&I=LXWLX1&P=7
would that be a good combo to run?
and, is the cyclone-s a good chassis to start with? i've never done anything on-road
would that be a good combo to run?
and, is the cyclone-s a good chassis to start with? i've never done anything on-road
#5820
Tech Champion
iTrader: (22)
Is the USVTA site down for updates? Getting a GoDaddy domain name parked message when following this link:
http://www.usvintagetransam.com/
Thanks!
Daddy-o
http://www.usvintagetransam.com/
Thanks!
Daddy-o