Hpi Pro 4
#1068
@Mr_Orange: bladders are like shock-oil nowadays, just needed for fine-tuning. And who runs the kits shock oil...
His car was actually really stock as far as I could see, only that purple clamp on heatsink and a delrin diff (don't know why this was needed tough) were options!
His car was actually really stock as far as I could see, only that purple clamp on heatsink and a delrin diff (don't know why this was needed tough) were options!
#1069
Tech Champion
iTrader: (9)
Originally posted by racer
Kingcrab & RC-zombies,
since both of you i know have the HB graphite bumper brace.
did any one have problems installing it?
i have tried installed the stock plastic pegs on to the graphite brace. and when trying to install the pegs on to the lower bumper frame, it does not align properly. my pegs are slightly bent.
anything we can do to fix this?
any help would be appreciated.
Thanks!
Kingcrab & RC-zombies,
since both of you i know have the HB graphite bumper brace.
did any one have problems installing it?
i have tried installed the stock plastic pegs on to the graphite brace. and when trying to install the pegs on to the lower bumper frame, it does not align properly. my pegs are slightly bent.
anything we can do to fix this?
any help would be appreciated.
Thanks!
#1070
Tech Apprentice
No problem, for build the Hot Bodies bumper carbon plate, i use the 65mm front body post of hot bodies it's perfect.
Yann.
Yann.
#1071
Tech Champion
iTrader: (9)
CHASSIS FLEX
can you guys say..."Flexy flier II"
j/k
with the concern of the 2.5mm chassis thickness...I'll have to say the chassis is rock solid! Virtually no lateral flex at all.
I'll have pics of the chassis with all the electronics installed this weekend.
so far this is the option parts I've used:
HB60116 Shock Shaft L (2 pks)
HB60106 60mm alum. body mounts or
HB60107 65mm
HB61131 Nitro 3 graphite bumber support
HPI72422 Aluminum spring perch
#10732 Ofna purple aluminum servo arm.
T3844P Eagle racing purple motor heatsink
Trinity shock mounts (no longer in production)
Alex Racing Ti screws. (left overs from my 'Cuda)
Electronics:
Futaba S9550 Digital low profile servo. Since there is plenty of room may switch to the faster S9541
HB Hara Twister Esc. (KO VSF-2000)
Futaba 3PK HRS system
the car doesn't really need any option parts...the car is great out of the box.
j/k
with the concern of the 2.5mm chassis thickness...I'll have to say the chassis is rock solid! Virtually no lateral flex at all.
I'll have pics of the chassis with all the electronics installed this weekend.
so far this is the option parts I've used:
HB60116 Shock Shaft L (2 pks)
HB60106 60mm alum. body mounts or
HB60107 65mm
HB61131 Nitro 3 graphite bumber support
HPI72422 Aluminum spring perch
#10732 Ofna purple aluminum servo arm.
T3844P Eagle racing purple motor heatsink
Trinity shock mounts (no longer in production)
Alex Racing Ti screws. (left overs from my 'Cuda)
Electronics:
Futaba S9550 Digital low profile servo. Since there is plenty of room may switch to the faster S9541
HB Hara Twister Esc. (KO VSF-2000)
Futaba 3PK HRS system
the car doesn't really need any option parts...the car is great out of the box.
Last edited by rc-zombies; 01-16-2004 at 10:32 AM.
#1074
motor heatsink
rc-zombies,
where did you get your motor heatsink?
where did you get your motor heatsink?
#1075
Tech Champion
iTrader: (9)
Re: motor heatsink
Originally posted by racer
rc-zombies,
where did you get your motor heatsink?
rc-zombies,
where did you get your motor heatsink?
http://cgi.ebay.com/ws/eBayISAPI.dll...category=44023
HPI or HB will probably release their version one-day...
#1076
Tech Champion
iTrader: (9)
HUDY BALANCING TOOL
The bottom of the Pro4 chassis has 2 very small holes to fine tune the balance of the car. The Hudy balance tools works just fine... #10880
http://www.mytsn.com/products/prodin...ppid=HUD107880
http://www.mytsn.com/products/prodin...ppid=HUD107880
#1077
rc-zombies,
have you tried placing Xrays balancing weights on the car? just wondering if they would fit.
have you tried placing Xrays balancing weights on the car? just wondering if they would fit.
#1078
Tech Champion
iTrader: (9)
Originally posted by racer
rc-zombies,
have you tried placing Xrays balancing weights on the car? just wondering if they would fit.
rc-zombies,
have you tried placing Xrays balancing weights on the car? just wondering if they would fit.
#1079
Carpet Setup?
Does anyone have a starting point for a carpet setup on the car yet?
#1080
Re: Carpet Setup?
Originally posted by tcdrvr
Does anyone have a starting point for a carpet setup on the car yet?
Does anyone have a starting point for a carpet setup on the car yet?
http://www.lrp-electronic.de/d/uploa...Hara_DHI04.pdf