CRC's New Generation-X.... Your Thoughts?
#1306
Tech Elite
iTrader: (1)
Whats up All!! Not an owner yet...............hope to within the week but I was wondering, does AMBr make a generic replacement case for their transponders? I don't need it to have my number on the outside, I just need it to have the ears on it as I'd like to take advantage of the cars place for it.
Thanks,
Kevin
Thanks,
Kevin
#1307
Tech Initiate
iTrader: (4)
Breaking Shocks
I have broken a couple of the threaded portions of the shock off during a hard straight on impact. This is on the threaded damper end that goes into the ball cup. I think that during an impact, the o-ring battery retainer is not strong enough to keep the battery in place. The result is the battery momentarily moving and slamming into the shock. This results in a bent threaded ball cup shaft. If I try to bend it back to straight, it will break. I've gone through 3 shocks in the last 5 club races. Its getting rather expensive. Has anyone else experienced this? Is there a way to avoid it. I'm trying to devise a way to resurrect my three broken shock tubes.
#1308
Tech Apprentice
Try putting an o-ring on the shock shaft. The shock is the only thing to stop the rear pod from moving ahead in an impact, so it takes all the force. The o-ring absorbs some of the shock. If you think it is the batteries you could always tape them in...
James
James
#1309
I have broken a couple of the threaded portions of the shock off during a hard straight on impact. This is on the threaded damper end that goes into the ball cup. I think that during an impact, the o-ring battery retainer is not strong enough to keep the battery in place. The result is the battery momentarily moving and slamming into the shock. This results in a bent threaded ball cup shaft. If I try to bend it back to straight, it will break. I've gone through 3 shocks in the last 5 club races. Its getting rather expensive. Has anyone else experienced this? Is there a way to avoid it. I'm trying to devise a way to resurrect my three broken shock tubes.
this happened to me when i ran the L4 car (the battery's dont move in that car at all)
you could tape them in if you want.but i find the o ring is fine enough.
#1311
Wayne
#1312
Tech Apprentice
For Sale
A CRC Gen-X I only ran this car this week at the Snowbirds. The chassis has been sanded and sealed by Mike Odonnell, and has no scratches marks or chips on it. The car will come with a Novak GTX speedo, a JR3550 servo and a Spektrum Micro Receiver. The car was also wired by Mike and looks awesome. The car will come with two Cobalt 27t motors only cut once and two Promatch IB4200 cells. The car has the new Open X rear pod on it and the new longer front pivot balls on it, along with a Slapmaster front bumper and thrust bearing. The car will come with a new set of high roller tires and I new painted body, along with some spare parts. I am asking $315 shipped anywhere in the US and I will only accept paypal. If you have any question or would like some pics of the car Email me at [email protected]
A CRC Gen-X I only ran this car this week at the Snowbirds. The chassis has been sanded and sealed by Mike Odonnell, and has no scratches marks or chips on it. The car will come with a Novak GTX speedo, a JR3550 servo and a Spektrum Micro Receiver. The car was also wired by Mike and looks awesome. The car will come with two Cobalt 27t motors only cut once and two Promatch IB4200 cells. The car has the new Open X rear pod on it and the new longer front pivot balls on it, along with a Slapmaster front bumper and thrust bearing. The car will come with a new set of high roller tires and I new painted body, along with some spare parts. I am asking $315 shipped anywhere in the US and I will only accept paypal. If you have any question or would like some pics of the car Email me at [email protected]
#1313
Tech Adept
For Sale
A CRC Gen-X I only ran this car this week at the Snowbirds. The chassis has been sanded and sealed by Mike Odonnell, and has no scratches marks or chips on it. The car will come with a Novak GTX speedo, a JR3550 servo and a Spektrum Micro Receiver. The car was also wired by Mike and looks awesome. The car will come with two Cobalt 27t motors only cut once and two Promatch IB4200 cells. The car has the new Open X rear pod on it and the new longer front pivot balls on it, along with a Slapmaster front bumper and thrust bearing. The car will come with a new set of high roller tires and I new painted body, along with some spare parts. I am asking $315 shipped anywhere in the US and I will only accept paypal. If you have any question or would like some pics of the car Email me at [email protected]
A CRC Gen-X I only ran this car this week at the Snowbirds. The chassis has been sanded and sealed by Mike Odonnell, and has no scratches marks or chips on it. The car will come with a Novak GTX speedo, a JR3550 servo and a Spektrum Micro Receiver. The car was also wired by Mike and looks awesome. The car will come with two Cobalt 27t motors only cut once and two Promatch IB4200 cells. The car has the new Open X rear pod on it and the new longer front pivot balls on it, along with a Slapmaster front bumper and thrust bearing. The car will come with a new set of high roller tires and I new painted body, along with some spare parts. I am asking $315 shipped anywhere in the US and I will only accept paypal. If you have any question or would like some pics of the car Email me at [email protected]
#1314
Tech Apprentice
#1315
Tech Apprentice
CRC HIGH ROLLER TIRES FOR SALE
Front pairs
Magenta- New
Magenta- Cut to 1.70 used
Purple- cut to 1.70 new
Black- cut to 1.70 new
Rear Pairs
Grey- cut to 1.74 new
Grey- cut to 1.77 used
White- new
Magenta- new
Pink- cut to 1.74 used
Grey- cut to 1.77 new
Pink- cut to 1.77 new
White- cut to 1.77 new
All of these tire are in great shape. None of the used tire have been chunked, and most only have one 8min run on them. I am asking 65.00 Paypal for all of them shipped anywhere in the US. If you have any questions or would like to see pics Email me at [email protected]
Front pairs
Magenta- New
Magenta- Cut to 1.70 used
Purple- cut to 1.70 new
Black- cut to 1.70 new
Rear Pairs
Grey- cut to 1.74 new
Grey- cut to 1.77 used
White- new
Magenta- new
Pink- cut to 1.74 used
Grey- cut to 1.77 new
Pink- cut to 1.77 new
White- cut to 1.77 new
All of these tire are in great shape. None of the used tire have been chunked, and most only have one 8min run on them. I am asking 65.00 Paypal for all of them shipped anywhere in the US. If you have any questions or would like to see pics Email me at [email protected]
Last edited by IMTK422; 02-05-2008 at 07:35 AM. Reason: typer error
#1316
Tech Apprentice
CRC HIGH ROLLER TIRES FOR SALE
Front pairs
Magenta- New
Magenta- Cut to 1.70 used
Purple- cut to 1.70 new
Black- cut to 1.70 new
Rear Pairs
Grey- cut to 1.74 new
Grey- cut to 1.77 used
White- new
Magenta- new
Pink- cut to 1.74 used
Grey- cut to 1.77 new
Pink- cut to 1.77 new
White- cut to 1.77 new
All of these tire are in great shape. None of the used tire have been chunked, and most only have one 8min run on them. I am asking 65.00 Paypal for all of them shipped anywhere in the US. If you have any questions or would like to see pics Email me at [email protected]
Front pairs
Magenta- New
Magenta- Cut to 1.70 used
Purple- cut to 1.70 new
Black- cut to 1.70 new
Rear Pairs
Grey- cut to 1.74 new
Grey- cut to 1.77 used
White- new
Magenta- new
Pink- cut to 1.74 used
Grey- cut to 1.77 new
Pink- cut to 1.77 new
White- cut to 1.77 new
All of these tire are in great shape. None of the used tire have been chunked, and most only have one 8min run on them. I am asking 65.00 Paypal for all of them shipped anywhere in the US. If you have any questions or would like to see pics Email me at [email protected]
#1317
Tech Apprentice
CRC GEN-X FOR SALE
This car has only one race on it. The car has a open-X rear end, the long pillow balls, Ti. turnbuckles,Ti Front screws, ceramic bearings, Slapmaster bumper and thrust bearing, and ceramic balls. The chassis is sanded and sealed by Mike Odonnell. This car is awesome, it only has the snowbirds on it. The chassis is perfect. I am asking $200 for this car. I only accept Paypal and will only ship in the lower 48 states. If you have any question, or would like to see pics email me at [email protected]
This car has only one race on it. The car has a open-X rear end, the long pillow balls, Ti. turnbuckles,Ti Front screws, ceramic bearings, Slapmaster bumper and thrust bearing, and ceramic balls. The chassis is sanded and sealed by Mike Odonnell. This car is awesome, it only has the snowbirds on it. The chassis is perfect. I am asking $200 for this car. I only accept Paypal and will only ship in the lower 48 states. If you have any question, or would like to see pics email me at [email protected]
#1318
What servo will fit in this car? What one works best?
Thanks
Thanks
#1319
I have a Futaba s9650 in my rugrat will that fit?
Thanks
Thanks