Hot Bodies D413 1/10 4WD Buggy
#7292
B44. I'm pretty sure...
i know a lot of comments circulate about how soft the stock springs are but I was at the reedy race yesterday and noticed the hot bodies guys running some of the stock springs. I'm sure they know what they are doing. I'm still trying to figure out my left from right.
i know a lot of comments circulate about how soft the stock springs are but I was at the reedy race yesterday and noticed the hot bodies guys running some of the stock springs. I'm sure they know what they are doing. I'm still trying to figure out my left from right.
#7293
Tech Champion
iTrader: (15)
Finally broke something on my car Saturday, the steering rack snapped in two. Luckily, there was a guy there with his D413 and not racing it that day, so I borrowed it to finish the day. Ordered a spare stock rack and an RCShox rack. Can't believe that companies like Avid, Schelle, and Exotek haven't made an aluminum bb rack for this car yet.
#7294
I hope HB comes out with their own upgrades too..
#7295
#7297
#7299
#7300
can someone please tell me which postion on the rear hub where it mounts to the arm would postion 1 or 2 be high roll center?
#7302
Is this still the part number for the aluminum shock caps? #114112. I'll be building one of these kits soon and would like to start off with the aluminum caps. I haven't been able to find them: http://www.hpiracing.com/en/part/114112
edit: I think I found it: http://www3.towerhobbies.com/cgi-bin...&I=LXEYVD&P=ML
edit: I think I found it: http://www3.towerhobbies.com/cgi-bin...&I=LXEYVD&P=ML
Last edited by skeasor; 01-27-2015 at 07:23 AM.
#7303
Just ordered all new bearings from Avid. Tore down the buggy after the first run and both large back bearings and one front bearing were super notchy. Anybody else experienced this?
#7304
Tech Master
iTrader: (7)
Is this still the part number for the aluminum shock caps? #114112. I'll be building one of these kits soon and would like to start off with the aluminum caps. I haven't been able to find them: http://www.hpiracing.com/en/part/114112
edit: I think I found it: http://www3.towerhobbies.com/cgi-bin...&I=LXEYVD&P=ML
edit: I think I found it: http://www3.towerhobbies.com/cgi-bin...&I=LXEYVD&P=ML
#7305