Durango DEX210 Thread
Tech Fanatic
iTrader: (4)
What did you have to do to get that done?
Just a arm and shock swap?
Just a arm and shock swap?
We have some dry clay tracks up this way. I left the same setup on my car from my last time out. My car had plenty of steering but the rear end would step out on power. Just looking for a change and saw Jorns car had this on at EOS... And also noticed this trend throughout the industry for MM, I'll see what it does for RM
i had the same problem with rear traction. i moved my shorty up against my esc, as i was similar esc/battery setup as you have. pushing back against esc helped immensely, and it might help you out as well.
but how is it with the standard 3 degree toe in.
when you flip the arms from left to right? how is it with that 3 degree toe in?
those arms are not at an 90 degree angle from the chassis I asume.
when flipped from left to right do you stil maintain the 3 degree toe in?
im really intrested, cause you cant find a track with lower grip than mine
when you flip the arms from left to right? how is it with that 3 degree toe in?
those arms are not at an 90 degree angle from the chassis I asume.
when flipped from left to right do you stil maintain the 3 degree toe in?
im really intrested, cause you cant find a track with lower grip than mine
Tech Elite
iTrader: (10)
the hing pins are paralel so flipping the arms won't affect anything geometry wise.
Hmmmm, I have 1 regular +8mm chassis and everyone on the vip list has theres, I'll have to go to the top of the waiting list unless someone offers me lots of money I asked the machinist to make as many as quickly as I can, once I have a few to sell I'll post up here. Due to the way I'll be doing the shipping, I'll probably have a order minimum of 2 as I haven't found a god size box yet. Once I get them I will have a price and let the people first inline know and give 48 hours to send paypal before going to the next person in line.
Hmmmm, I have 1 regular +8mm chassis and everyone on the vip list has theres, I'll have to go to the top of the waiting list unless someone offers me lots of money I asked the machinist to make as many as quickly as I can, once I have a few to sell I'll post up here. Due to the way I'll be doing the shipping, I'll probably have a order minimum of 2 as I haven't found a god size box yet. Once I get them I will have a price and let the people first inline know and give 48 hours to send paypal before going to the next person in line.
the hing pins are paralel so flipping the arms won't affect anything geometry wise.
Hmmmm, I have 1 regular +8mm chassis and everyone on the vip list has theres, I'll have to go to the top of the waiting list unless someone offers me lots of money I asked the machinist to make as many as quickly as I can, once I have a few to sell I'll post up here. Due to the way I'll be doing the shipping, I'll probably have a order minimum of 2 as I haven't found a god size box yet. Once I get them I will have a price and let the people first inline know and give 48 hours to send paypal before going to the next person in line.
Hmmmm, I have 1 regular +8mm chassis and everyone on the vip list has theres, I'll have to go to the top of the waiting list unless someone offers me lots of money I asked the machinist to make as many as quickly as I can, once I have a few to sell I'll post up here. Due to the way I'll be doing the shipping, I'll probably have a order minimum of 2 as I haven't found a god size box yet. Once I get them I will have a price and let the people first inline know and give 48 hours to send paypal before going to the next person in line.
DEX210 1. and 2. on the podium in the Euro Offroad Series, round 3 !
but how is it with the standard 3 degree toe in.
when you flip the arms from left to right? how is it with that 3 degree toe in?
those arms are not at an 90 degree angle from the chassis I asume.
when flipped from left to right do you stil maintain the 3 degree toe in?
im really intrested, cause you cant find a track with lower grip than mine
when you flip the arms from left to right? how is it with that 3 degree toe in?
those arms are not at an 90 degree angle from the chassis I asume.
when flipped from left to right do you stil maintain the 3 degree toe in?
im really intrested, cause you cant find a track with lower grip than mine
Tech Fanatic
iTrader: (4)
Good evening G... might have to add internal limiters
Tech Fanatic
iTrader: (29)
FYI for anyone looking for an 8-Racing carbon fiber chassis. I bought one direct from 8-racing for $90 shipped. I will take a bit to get here from Germany but it beats paying $140 plus shipping from the importers.
Tech Master
iTrader: (6)
Are the B4 turnbuckles a direct fit using AE balls and cups?
Ae balls and cups that are the same size and as long as the studs are 3m and the right length why not , the turnbuckles are around different sizes so it may be cheaper to buy the same sizes I have losi 50mm titanium with lungford cups and losi studs all 4.8 mm balls I don't see any if maybe one or two threads so they could be maybe 45-48 mm for a betters length but the cups and balls r your choice