forty6

how are you guys reaming out the b4 spurs. i practiced on 2 old ones i have laying around and i cant seem to get it right. i always end up with one that is not perfectly centered.

Cpt.America

iTrader: (52)

I only tried one, and it came out pretty close, but still wobbled a little bit. It was good enough for one race weekend until I was able to buy my set of RW spurs. I wouldn't bother really... id fork out the dough for an RW, or a schumacher, and be done.

Rideordieguy1

iTrader: (45)

Get the RW spurs on eBay ! I put the 81 Spur & matched it with a 30 pinion and runs good...

Dog Runner

iTrader: (23)

Losi springs work for me, at least on the rear shocks.

Konich

iTrader: (9)

I've used a sharp losi body reamer and went a little on each side. Don't try to do a side all at once, do a little at a time and switch back and fourth. My spur fits perfect with no wobble. Take your time and you'll be fine.

Jmuck69

iTrader: (14)

Im currently running the Schumacher machined spur but after every run I crack open the gear cover and there is fine black dust on the motor plate. Is this typical of machined delrin spurs or just the Schumacher?

Cpt.America

iTrader: (52)

I never had that issue when I was running the cougar... not sure.

jurquhart

iTrader: (22)

Finally, my buggy should be in next week. everyone on here has been great with their tips. Hopefully the build should go well.

Still not clear as to where to get the Durango springs that are listed on that spreadsheet. Are they the same as what are on the 410?

The Juice

iTrader: (25)

Any reason you guys are reaming out spurs to fit instead of the RW ones that are deigned for the 210? Just wondering if theres something I should know about the RW's.

flame56mx

iTrader: (520)

I would download the online manual, if you haven't already, there are are a few discrepancies in the kit book, The springs are the same as the 410, as long as you make sure to get the big bores, part numbers should match up..

No, other than maybe using stuff we already have, the Rw's were not available right away..

Thunderbunny

iTrader: (27)

I need a gear box! I broke mine where the camber link mounts. Anybody have a spare, or know where I can find one in stock? Thanks!

BIGTIME

iTrader: (116)

Where can I find a good setup on the DEX210 for WC

teeforb

iTrader: (94)

I just ordered a 75t Rw racing spur for stock spec class.

teeforb

iTrader: (94)

Any gearing recommendation for stock spec class?

paposwing14

iTrader: (64)

Lid shot before stickers. Going to track tomorrow! Finally done the 2 week project due to time and $$$.