JConcepts Thread
#6992
I don't know; they could order them now though .
I think John is originally from St. Louis, so he knows his way around cold weather .
Did John draw the short straw for getting the cold weather races? First time I met him was at Spektrum, which was not FL. weather and now he gets to go to Ohio which most likely won't be FL. weather either. Poor guy.
#6993
#6994
Tech Regular
Anyone have problems with the jcon steering rack? I put one on this week and it has a lot of play up and down and I used the spacers, it's like the bearings are the wrong thickness.
#6995
had the JC rack in the sc10 and it was very good, make sure the bearings are the right ones!
#6996
Tech Addict
iTrader: (1)
So with the new associated cars will we see a newly designed body? I know I've asked before but I'm really ready to see some new buggy body designs
Is the new silver compound designed to be a sauce tire or was it to avoid using sauce but have the same traction as sauced tires?
Is the new silver compound designed to be a sauce tire or was it to avoid using sauce but have the same traction as sauced tires?
#6997
So with the new associated cars will we see a newly designed body? I know I've asked before but I'm really ready to see some new buggy body designs
Is the new silver compound designed to be a sauce tire or was it to avoid using sauce but have the same traction as sauced tires?
Is the new silver compound designed to be a sauce tire or was it to avoid using sauce but have the same traction as sauced tires?
None of the tires are really designed to be sauced; it's just a trial and error system and tends to be track specific. The silver does feel softer and tends to come in quicker, so in theory they shouldn't need to be sauced as heavily or at all.
#6998
Tech Regular
I used the bearings that came with it and they're not upside down.
#6999
JSWO I just installed the rack in my b4 and new sc10.2 kit a few days ago and had the same issue. The bearings are moving in the graphite if you move one end up and down you will see what i mean on the other side.
Bearings in both rack kits I bought were not a press fit. I even ran it sloppy like that in my b4.2 and the steering arm wore the top of the graphite rack so what I did was use CA on the graphite then put the bearing in. Be very careful to not use too much CA so it doesn't drip in the bearing! Both racks work fine now after many many runs on them and have no slop.
#7000
When is the silver going to available to the public?
#7001
Idk if it's been mentioned on here I didn't look back thru all the pages, but will there be slicks mady by JC?
#7002
Any pics of the splitters?
#7003