R/C Tech Forums
0 2026/04/01 12:54:27
I just hand turned this 5.5mm drill bit to open the servo mount which allowed it to be tightened down.
I just hand turned this 5.5mm drill bit to open the servo mount which allowed it to be tightened down.
0 2025/07/21 14:05:40
This is the replacement clip
This is the replacement clip
0 2025/07/21 14:05:38
Left side the re-configured upper insert holder. Right side is the original and where they break
Left side the re-configured upper insert holder. Right side is the original and where they break
0 2025/07/21 14:05:35
You can see the size difference in the wire diameter of the spring clips. Upper original, lower the replacement
You can see the size difference in the wire diameter of the spring clips. Upper original, lower the replacement
0 2025/07/21 14:05:32
X20 '25
X20 '25
0 2025/06/03 12:35:58
lower shock retainer difference.
lower shock retainer difference.
0 2025/06/03 12:30:16
24 spring on left, 25 spring on right.
24 spring on left, 25 spring on right.
0 2025/06/03 12:29:36
out drive spacing.
out drive spacing.
0 2025/06/03 12:29:34
shock shaft top finish, no nub.
shock shaft top finish, no nub.
0 2025/06/03 12:29:32
internal bore of new shock.
internal bore of new shock.
0 2025/06/03 12:29:30
new arm on top. compare shock mount position.
new arm on top. compare shock mount position.
0 2025/06/03 12:29:28
new arm on top. compare shock mount position
new arm on top. compare shock mount position
0 2025/06/03 12:29:26
0 2025/02/12 13:15:33
0 2023/05/02 10:56:00
23 shock top with pointer indicator for oil weight
23 shock top with pointer indicator for oil weight
0 2023/04/19 09:55:27
21 (top) shock versus 23 shock
21 (top) shock versus 23 shock
0 2023/04/19 09:55:24
Overlay of 20/21 arms over 23 arms
Overlay of 20/21 arms over 23 arms
0 2023/04/19 09:55:22
23 floating shock tower
23 floating shock tower
0 2023/04/19 09:55:19
23 up/down axle adjustment
23 up/down axle adjustment
0 2023/04/19 09:55:14
23 rear bearing offset
23 rear bearing offset
0 2023/04/19 09:55:11
23 front bearing offset
23 front bearing offset
0 2023/04/19 09:55:07
23 bulkhead width
23 bulkhead width
0 2023/04/19 09:55:04
23 bearing holder
23 bearing holder
0 2023/04/19 09:55:00
21 bearing holder offset
21 bearing holder offset
0 2023/04/19 09:54:55
0 2021/11/01 14:04:54
0 2021/11/01 14:03:28
0 2021/10/30 14:04:01
0 2021/03/26 19:38:01
0 2021/03/26 19:37:56
To use the front steering upright in the rear, you only need to trim the nub off the lower rear arm where the pivot ball installs. Just remember that when setting your car width you will now use the front settings in the rear.
To use the front steering upright in the rear, you only need to trim the nub off the lower rear arm where the pivot ball installs. Just remember that when setting your car width you will now use the front settings in the rear.
0 2021/03/22 19:40:44
0 2021/03/22 19:39:52
0 2021/03/22 19:39:22
This is the X20 arm mount replacing the X20'21 mount.
This is the X20 arm mount replacing the X20'21 mount.
0 2021/03/22 19:37:36
0 2021/03/22 18:58:34
0 2021/01/25 16:32:37
0 2019/12/30 10:11:55
0 2019/12/23 10:17:58
0 2019/12/23 10:10:58
0 2019/12/23 10:10:55
Advertising | Cookie Policy | Privacy Statement | Terms of Service | Manage Preferences | Your Privacy Choices
Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.