R/C Tech Forums
After a long delay. Unofficially assembled. Have to find screw for servo. And install motor/esc.
After a long delay. Unofficially assembled. Have to find screw for servo. And install motor/esc.
0 2018/12/18 05:35:57
With the FF FWD.
With the FF FWD.
0 2018/12/18 05:35:57
Rear wing almost complete. Have to find 2 screws the list needed.
Rear wing almost complete. Have to find 2 screws the list needed.
0 2018/12/19 05:46:12
Protoform Europa FWD body. Not perfectly centered but should be ok. If doba another body in future I’ll have to move rear posts forward a little
Protoform Europa FWD body. Not perfectly centered but should be ok. If doba another body in future I’ll have to move rear posts forward a little
0 2018/12/20 05:32:02
Looks ok when I check
Looks ok when I check
0 2018/12/20 06:50:59
Front wing assembled. Rear wing and rear sway bar installed.
Front wing assembled. Rear wing and rear sway bar installed.
0 2018/12/21 05:41:12
To get myself to avoid making a impulsive purchase. Pulled out the unfinished backups. Serpent enyx4.0, XRay T4 ‘17, and Mugen. For what I would spend on the new Serpent F1. I could get these running.
To get myself to avoid making a impulsive purchase. Pulled out the unfinished backups. Serpent enyx4.0, XRay T4 ‘17, and Mugen. For what I would spend on the new Serpent F1. I could get these running.
0 2018/12/22 04:07:35
Getting closer. 3Racing MG Mini FWD.
Getting closer. 3Racing MG Mini FWD.
0 2018/12/22 05:44:30
It’s the MST TCR. Can be fwd or RWD. There is a thread for it. It’s just become available. I’ve still got build mine.
It’s the MST TCR. Can be fwd or RWD. There is a thread for it. It’s just become available. I’ve still got build mine.
0 2018/12/22 08:39:58
Welll......
Welll......
0 2018/12/22 11:41:54
0 2018/12/23 05:21:33
Right side steering knuckle broke on the RM. Bit strange but I’ve got a spare.
Right side steering knuckle broke on the RM. Bit strange but I’ve got a spare.
0 2018/12/23 09:27:25
So here’s pictures of the chassis. Somewhere receiver, servo and ESC all have to fit.
So here’s pictures of the chassis. Somewhere receiver, servo and ESC all have to fit.
0 2018/12/24 09:46:10
Here’s what the guide shows. Mounting esc sideways. But to stay under the body it’s going to need to be small.
Here’s what the guide shows. Mounting esc sideways. But to stay under the body it’s going to need to be small.
0 2018/12/24 09:46:10
0 2018/12/24 09:46:10
0 2018/12/24 09:46:11
Oddly, Serpent uses the Monster truck for their Christmas post.
Oddly, Serpent uses the Monster truck for their Christmas post.
0 2018/12/24 10:54:00
0 2018/12/24 17:07:58
By shear luck I ran into the mailman as I was headed towards my dads.
By shear luck I ran into the mailman as I was headed towards my dads.
0 2018/12/24 17:09:26
Struck by a burst of energy early. Track has been flipped to smooth side. Just need to clean and put the rails back on.
Struck by a burst of energy early. Track has been flipped to smooth side. Just need to clean and put the rails back on.
0 2018/12/25 05:25:19
M chassis body. Some outside the States don’t seem to understand cars like this.
M chassis body. Some outside the States don’t seem to understand cars like this.
0 2018/12/25 05:27:27
Well progress has hit a snag. I’ve either lost or Kit was missing one of the mounts for the servo. And unfortunately it’s an overseas part. So for second kit in a row. I’m stuck waiting, probably 3 weeks for the part.
Well progress has hit a snag. I’ve either lost or Kit was missing one of the mounts for the servo. And unfortunately it’s an overseas part. So for second kit in a row. I’m stuck waiting, probably 3 weeks for the part.
0 2018/12/26 05:25:48
Also missing the long turnbuckle for the steering. Well gives time to try to figure out how to mount esc. This is my Reedy 800z blackbox that used to be in my Associated F6. Looks like might be my only option. What I had hoped to use, has zero chance of fitting under the body
Also missing the long turnbuckle for the steering. Well gives time to try to figure out how to mount esc. This is my Reedy 800z blackbox that used to be in my Associated F6. Looks like might be my only option. What I had hoped to use, has zero chance of fitting under the body
0 2018/12/26 05:42:56
0 2018/12/26 05:42:56
Esc will mount on top deck. Either under, it fan is removed. Or to the right if leave fan on. The long steering linkage will clear if no fan
Esc will mount on top deck. Either under, it fan is removed. Or to the right if leave fan on. The long steering linkage will clear if no fan
0 2018/12/27 05:41:17
This one.
This one.
0 2018/12/27 07:56:07
Yeah, no really good place here for front plate. For most part they don’t enforce it. Now if you get stopped for something they will then add it on. But usually not reason to be pulled over. Now there are a few suburbs that do seem bent on forcing everyone to have that front plate.
Yeah, no really good place here for front plate. For most part they don’t enforce it. Now if you get stopped for something they will then add it on. But usually not reason to be pulled over. Now there are a few suburbs that do seem bent on forcing everyone to have that front plate.
0 2018/12/28 12:16:29
Rear plate gets the sticker each year. Criminal has a wide ranging description. Back during my drug using days, I knew many that no one would ever guess were involved in illegal activity. Also knew a lot that had the criminal look, but never even had a parking ticket
Rear plate gets the sticker each year. Criminal has a wide ranging description. Back during my drug using days, I knew many that no one would ever guess were involved in illegal activity. Also knew a lot that had the criminal look, but never even had a parking ticket
0 2018/12/28 15:10:31
These are 1/18. Ther are have wing model.
These are 1/18. Ther are have wing model.
0 2018/12/29 09:49:42
0 2018/12/31 10:39:13
0 2018/12/31 10:39:20
Today’s laps with the RM Porsche. Some progress since switching to the side
Today’s laps with the RM Porsche. Some progress since switching to the side
0 2018/12/31 15:38:13
Here’s the before. Strange. Sometimes can load two pictures at once. Sometimes can’t. Or will only post one.
Here’s the before. Strange. Sometimes can load two pictures at once. Sometimes can’t. Or will only post one.
0 2018/12/31 15:38:13
Is this too many classes? Now are we talking about local racing or bigger events?
Is this too many classes? Now are we talking about local racing or bigger events?
0 2019/01/02 14:56:54
Would this work? Was need to glue front pulley on a touring car build
Would this work? Was need to glue front pulley on a touring car build
0 2019/01/02 17:16:08
It looks like I could use this one. I’ve gotten used to it so it would be fine by me. I’ve never been much on all the crazy settings most controllers now have.
It looks like I could use this one. I’ve gotten used to it so it would be fine by me. I’ve never been much on all the crazy settings most controllers now have.
0 2019/01/03 15:48:09
The MG FWD. still have to put the wing on. But you can see how the rear posts are directly in front of the wing. And they didn’t include anything to raise wing height. Yes body posts will be cut.
The MG FWD. still have to put the wing on. But you can see how the rear posts are directly in front of the wing. And they didn’t include anything to raise wing height. Yes body posts will be cut.
0 2019/01/04 05:09:39
Dave S. Found that special metric adjustable wrench for ya.
Dave S. Found that special metric adjustable wrench for ya.
0 2019/01/04 05:45:33
0 2019/01/04 06:24:04
0 2019/01/04 15:56:27
Advertising | Cookie Policy | Privacy Statement | Terms of Service | Manage Preferences | Your Privacy Choices
Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.